Does The Replacement HappiJac Remote Cable Control The Slide-Outs And Stabilizer Jacks

Question

Question:

My remote also operates the slide out as well as the jacks. Will this cable control the slide out as well as the jacks for my 2021 Lance Truck Camper?

asked by: RICHARD M

0

Expert Reply:

The Replacement Remote Cable for HappiJac Electric Truck Camper Jack Systems # LC149557 is just the way for your remote # LC723915 to connect to the controller for initial setup or if you had an older non-wireless model. It won't control anything but will allow the remote and controller to communicate with each other.

I'm curious to see exactly what kind of setup you have that operates both the slides and the jacks. If you could send in some pictures I can take a look and we can figure out the correct replacement components you need.

expert reply by: Kevin C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Hey Brady, Brophy in the past has told us that the tie downs part #HSWB don't have a weight capacity but you would want to make sure you use them only with campers that were designed to fit the bed length of the truck. The turnbuckles part #TDHP…

view full answer...

Answer 6

Thanks for reaching out Kathleen. The TorkLift Custom Frame-Mounted Tie Downs #TL66ZV include the complete set of front and rear tie-downs for both the driver and passenger sides of your truck. This kit is the correct fit provided your Toyota Tacoma…

view full answer...

Answer 7

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 8

Hey Cindy, thanks for reaching out. We may have an extension that will work for you. It will help to know exactly how long of an extension you are needing as this will be one of the main deciding factors. Let me know how long you need it to be in the…

view full answer...

Answer 9

Hey Christian, Yes, the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL29DR will fit your 2016 Ram 2500 Crew Cab with running boards as long as you have a factory hitch receiver or no receiver at all. If your 2016 Ram 2500 Crew Cab with…

view full answer...

Answer 10

Hey Jeromy, thanks for reaching out. Unfortunately, there are not any air bag kits available for your 2015 GMC Sierra 1500 Denali with the factory MagneRide suspension. The MagneRide setup uses different suspension components and mounting locations…

view full answer...

Does The Replacement HappiJac Remote Cable Control The Slide-Outs And Stabilizer Jacks

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching