What Do Short Safety Cables of Roadmaster Base Plate Kit 4408-1 Attach To

Question

Question:

I have the4408-1 do I attach the short safety cables to my safety cables from my motor home? Thanks

asked by: Tim B

0

Expert Reply:

Yes, you would connect the short safety cables of the Roadmaster base plate kit part # 4408-1 to the safety cables that are run along the tow bar.

expert reply by: Jameson C

0

Answer 1

The etrailer Invisible Base Plate Kit, #e98946 installs to the factory front bumper of the 2000 Jeep TJ with two 1/2” x 1-3/4” hex bolts plus the center support brace hardware.

view full answer...

Answer 2

There currently isn't a compatible Blue Ox base plate for your 2022 Jeep Wrangler Sahara. There is however the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 which is a compatible fit (standard factory bumpers). These base plates have a…

view full answer...

Answer 3

Hello Ron, thanks for reaching out. Setting up your 2004 Wrangler to flat tow will be pretty straightforward. I recommend that you go with our etrailer brand for the base plate and tow bar. These are made for us by Demco, so you get a great USA made…

view full answer...

Answer 4

Yes the Roadmaster base plate kit part #RM-521424-5 that you referenced does fit the 2005 Jeep Wrangler you sent in a picture of as I can see that it has coil front suspension and not leaf spring front suspension.

view full answer...

Answer 5

This is a really good question. So what we've learned from our hitch and base plate kit manufacturers is that Grade 8 bolts while stronger are less forgiving if stressed since they are a harder metal. So the Grade 5 bolts which happen to also be…

view full answer...

Answer 6

The etrailer Invisible Base Plate Kit #e98946 is actually not going to work with your Ready Brute Elite Tow bar. Instead, you're going to need to use the Blue Ox Base Plate Kit #BX1120 with the Blue Ox Base Plate Adapter Brackets for Ready Brute…

view full answer...

Answer 7

Yes, there is if you are willing to drill into the stock bumper on your 2005 Jeep TJ or Wrangler. You will want to use the Demco Classic Base Plate Kit item #DM9518112. These bolt directly into the stock bumper using four 1/2" bolts. For a tow…

view full answer...

Answer 8

As indicated in the provided photo, the holes in the removable drawbars of the Roadmaster #RM-521424-5 base plate kit accept a 3/4 inch diameter pin, such as part #RM-910029 so the holes are actually fractionally larger than 3/4 of an inch. According…

view full answer...

Answer 9

Yes, the Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM-521424-5 will be compatible with both your 1999 Jeep Wrangler and your Roadmaster tow bar. To flat tow your 1999 Jeep Wrangler you'll also need a tow bar wiring kit, braking…

view full answer...

Answer 10

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 11

Hey David! As long as your 2026 Maverick is a hybrid, the Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM87NQ is indeed a fit. There are no baseplates for non-hybrid models as only the hybrids are flat towable. These baseplates are a…

view full answer...

What Do Short Safety Cables of Roadmaster Base Plate Kit 4408-1 Attach To

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching