Adding Brakes to 3,500 lb Axles with 6 Lug Hub
Published 09/09/2022
Products Featured in This Question
Question:
I currently have 6 lug hubs on my 3500 lb axles 6 on 5 1/2. Im wanting to replace my axles with ones that have brakes but dont want 5 lug hubs on them since I happen to have new tires and wheels on my current axles 6 on 5 1/2. Can you tell me how to get 6 lug - 3500 lb axles with brakes? 74/89 Thank you
asked by: Van
Expert Reply:
If your 3,500 lb axles have brake mounting flanges then you can simply install the Electric Brake Kit # AKEBRK-35-SA and use the Hub and Drum Assembly # AKHD-655-35-EZ-K which is compatible with 10" brakes and has the 6 on 5-1/2" bolt pattern.
For a complete replacement axle that meets your specs you can use the Dexter Trailer Axle w/ Electric Brakes # 8327820-EB instead. This matches your hub face and spring center measurements as well as the 6 on 5-1/2" bolt pattern. The higher weight capacity won't be an issue and you'll be able to use the same leaf springs so your suspension won't be more rigid, but you will need to use the U-Bolt Kit # APUBR-8 to accommodate the larger diameter of the trailer axle.
To wire your trailer for the brakes I recommend picking up the Junction Box Kit # HS381-9000, as much 10 Gauge Wire # 10-1-1 as needed to route the wiring, Butt Connectors # DW05745-10, and then a breakaway kit # 3802346.
Attached are some installation videos and a helpful article about adding electric brakes to a trailer for you to check out.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Center Hanger for 2" Wide Slipper Springs - 3-1/2" Tall - 7/8" Bolt Hole
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 2-3/8" Tall - 9/16" Bolt Hole
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-5/8" Tall - 9/16" Bolt Hole
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Search Results: 3500 lb axles
- Search Results: 3500lb axle
- Search Results: spring hangers
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure for Trailer Hitch Drop
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
on Trailer Brakes
