A secure suspension starts with a solid mount. This 3-5/8" tall hanger gives your double-eye leaf spring or equalizer a strong, stable connection to the trailer frame. It provides the attachment point that keeps the suspension geometry right so everything tracks true and rides smooth down the road.
Whether you’re rebuilding a single, tandem, or triple-axle setup, this hanger fits where you need it—front, center, or rear. That flexibility makes it a one-part solution for matching up new springs or equalizers without hunting down separate pieces for each spot.
Getting the right fit keeps your suspension quiet and long-lasting. This hanger is sized for 1-3/4" wide double-eye springs with 9/16" diameter eyes and uses a 9/16" bolt (sold separately). The inside width of 1-7/8" gives just enough clearance for smooth movement without side play.
At 4-1/4" tall overall, 2-3/8" wide, and 3" deep, this hanger is compact but tough enough to handle real-world loads. It suspends the spring or equalizer securely from the trailer frame so your suspension stays aligned and holds up through rough roads and heavy use.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna take a look at the Front or Center or Rear Hanger for Double-Eye Springs. It's 3 5/8 inches tall and has a 9/16 diameter bolt hole. This hanger can be configured to work in the front, the rear or the center position to suspend your double-eyed leaf springer equalizer. It provides the attachment point for the leaf springs, and this hanger will suspend your springer equalizer from the trailer frame. It is designed to fit 1 3/4 inch wide double-eye springs with 9/16 diameter eyes. It is designed to work with a 9/16 diameter bolt that we do sell separately on our website, and it's usually listed on this product page as a related project. Now to just give you a few dimensions on this. We're going to measure the overall dimension, so from the very bottom up to the very top.
It's going to be right at 4 1/4 inches tall. The width on it, from side to side, is going to be right at 2 3/8 inches wide, and the total depth is going to be right at 3 inches. When they do size the hangers, they call this one a 3 5/8 inch tall, and basically what they're measuring is from the center of this hole up to the top. If we go center, it's going to be right at 3 5/8 inches tall. Then the inside width on this is going to be right at 1 7/8 inches. That should do it for the review on the Front or Center or Rear Hanger for Double-Eye Spring, 3 5/8 inches tall and with a 9/16 diameter bolt hole..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Trailer Suspension Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.