Result: spring hangers

In order to convert your single axle trailer into a tandem you will need the additional axle, a tandem axle suspension kit, leaf springs and u-bolts. It will, however, take more than just adding these on to make the conversion. You will want to take…

Hey Charlie, thanks for reaching out! You can use Bearing Buddys like the Kit #BB1980A if your spindles have zerk fittings, but you'll need to remove the fittings in order to do so.

There is a difference between a 7-way round and and 7-way rv blade connector. If you take a look at the accompanying photo, which is from our linked article on trailer wiring you can see that the connector on the left has blade-style pins while the…

Self-adjusting brake assemblies are the way to go like with the #AKEBRK-7-SA which do fit your 7k Dexter axles. The only real reason to go with manual adjust is really just cost. At one point the self adjusting models were much more expensive but now…

You can get the parts in hanger kit #APT1 separately but not as a kit minus the hangers. The equalizer is #TREQR83. For shackle straps you will need 8 of #115052. For shackle bolts and nuts you would need 12 of #166081. For the 3/4 inch wet bolts,…

The purple wire on Kwikee step modules does not need to be connected for it to function as this is an optional porch light switch circuit. Yours not being connected is most likely not the issue. See attached wiring diagram. In this diagram you'll…

For the absolutely best performance and reliability you can't beat the HydraStar electric over hydraulic actuators. We have found that they are the most reliable, react the fastest and just in general work the best. For just the actuator you…

For your upgrade in trailer suspension on your triple axle Weekend Warrior toy hauler I recommend the E-Z Flex Triple Axle Suspension Kit with 7-3/4" Equalizers #K71-657-00. This kit comes with all the equalizers and hardware you need. Then you…

The Dexter E-Z Flex Suspension Kit part #K71-656-00 is designed for a triple axle trailer with 33" axle spread which is the distance between the axles on center. I don't have a way to look up the axle spread for any one trailer but so long…

For a triple axle trailer with 6k rated axles the correct Dexter EZ Flex is the part #K71-656-00. The #K71-657-00 would be for 8k axles. I attached an install video for this kit for you to check out as well.

The Dexter EZ Flex kit part #K71-657-00 that you referenced is a triple axle equalizer kit that comes with cushioned equalizers that are 7-3/4 inches wide from bolt hole center to bolt hole center. You may have ordered the #K71-656-00 instead as it…

The cushioned equalizers included with the #K71-657-00 E-Z Flex Suspension Upgrade Kit are 2-7/8 inches tall, which would lower your trailer by a half inch, which will only lower your ride height by small amount. The kit includes the shackles and…