Is There a Replacement Mounting Bracket For Lippert 63" Solera Awning Arms?

Question

Question:

I need the part/part number for the bracket that mounts to the side of the RV to hold the pitch arm assembly for a 63 XL Pitch Arm. Not the awning rail. But the mount for the side of the RV. It has two screws at the top, middle and bottom.

asked by: Scott Y

0

Expert Reply:

Lippert only offers the mounting bracket as an Assembly # LC404523 for your 63" Solera arms. While you can replace the Pitch Arm # LC67VR, head and strut, the rest of the arm parts are only available as a unit. This arm can be used on either the idler or power side with your current head.

expert reply by: Bud M

0

Answer 1

The Valterra Double RV Waste Valve, #T84B, has an overall measurement of 11-3/4" from edge to edge.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

The differences between the Firestone Ride Rite #F2613 and the Red Label #F2709 for your 2023 GMC Sierra 3500 Crew Cab Long Bed is the air pressure and max weight capacity. The Ride-Rite #F2613 are rated for 5,000lbs and 100 PSI, where the Red Label…

view full answer...

Answer 10

Hey Randy! I can definitely set you up with air bags and a compressor. I recommend Firestone since they make the most durable and reliable air bags. For a complete kit with an air compressor you can choose from the following: -Firestone Ride-Rite Air…

view full answer...

Answer 11

Hey Michael! The 2026 Kia Sportage Hybrid has the 12V battery integrated into the main battery so you won't be making a connection there. What you need to do is run the #C59236 hot lead to the 12V positive jump terminal under the hood. Everything…

view full answer...

Is There a Replacement Mounting Bracket For Lippert 63" Solera Awning Arms?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching