Trouble Shooting Furrion Camera That Is Flickering

Updated 09/07/2022 | Published 09/05/2022

Products Featured in This Question

U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles - 8" Long U-Bolts

(479)

$75.85

7-Way Vehicle Power Adapter for Furrion RV Observation Camera

(549)

$66.66

Question:

I have a furion 3 camera system. had it installed for 18 months. Started noticing the back camera flickering in and out everyonce in a while. went to the GD rally in elkhart ind. and the cameras stopped working. I have been able to get the left camera on everyonce in a while but it flickers in and out. I have a 42 ft rig and have had no problems before. I have a feeling the recx circuit in the monitor is going down. any ideas?

asked by: Larry B

Expert Reply:

It sounds like your running light pin is not providing enough power for the three cameras. I would recommend using The 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera # FR87PR.

This harness will connect the trailer wiring from your tow vehicle's 7-way trailer connector. It will provide your camera extra power.

If this doesn't help I would reach out to where you purchased the cameras from. It could be an internal problem.

I attached a review video link below.

expert reply by: Noah E