Replacement Hardware for 3" Wide Westin Nerf Bars on 2003 Dodge Ram 2500 Quad Cab

Question

Question:

I HAVE A 2003 DODGE 2500 QUAD CAB AND I NEED HARDWARE FOR 3" WESTIN NERF BARS.

asked by: TONY M

0

Expert Reply:

The correct replacement hardware will depend on the exact nerf bars you have on your 2003 Dodge Ram 2500. The 3" wide nerf bars from Westin and corresponding replacement hardware are as follows:

-Westin E-Series Round Nerf Bars - Black # 23-2315 and Stainless Steel # 23-2310
-Replacement Installation Hardware Kit for Westin E-series # 23-231PK

-Westin Signature Series Round Nerf Bars - Chrome Plated Steel # 25-2310
-Replacement Hardware for Westin Signature Series # 25-231PK

expert reply by: Robin H

0

Answer 1

I spoke to Westin about the Westin E-Series Round Nerf Bars part #23-2310 and they said the nerf bars are around 81" long.

view full answer...

Answer 2

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 3

Thanks for your question, James. Both the etrailer #e98948 and Demco #DM9519336 base plates will have a very similar, low-profile look once they’re installed, so neither one really stands out more than the other. They’re both custom-fit for your…

view full answer...

Answer 4

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

Answer 5

Hey Karl, thanks for reaching out. Yes, you can get a replacement for the 7-way socket that came with the #ETBC7L kit. For that you'll need the following: - Buyers Products Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat #337TC1474P…

view full answer...

Answer 6

Hi Chris! The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e83ZR will indeed fit your 2026 Subaru Forester Wilderness edition. This will bolt right on, though there is an underbody panel that will need to…

view full answer...

Answer 7

If the bike rack initially comes with a threaded hitch pin like the Malone #MPG2149 or the Curt #C18085 then a locking hitch pin like part #C23519 that you referenced won't actually fit. I do have some alternatives though that you can check out.…

view full answer...

Answer 8

Will, you're going to have to find out if the d-rings on your bumper are rated to be flat towed. If they can you can just use an adapter and a set of tow bars and you'd good. Otherwise, you're going to need to install a standard base…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Replacement Hardware for 3" Wide Westin Nerf Bars on 2003 Dodge Ram 2500 Quad Cab

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching