See what our Experts say about this Westin Nerf Bars - Running Boards

• Replacement Mounting Brackets for Westin Nerf Bars on a 2005 Ram 1500 Quad Cab
  Mounting brackets are specific for trucks and the running boards, so you can't just match brackets to the truck or running boards individually. They would need to be matched to the truck and running boards both. That being said, I can tell you that the Replacement Mounting Brackets and Hardware for Westin 3" Round Nerf Bars # 23-299PK that you are asking about are not the brackets you need. Those particular replacement brackets work with nerf bars that do not fit your 2005 Ram 1500. We...
  view full answer...
• Replacement Mounting Brackets for Westin Nerf Bars on 2006 Dodge Quad Cab Truck
  Since the nerf bars are designed to fit specific vehicles, you'll need a specific mounting kit for the bars more than one for the vehicle. The good news is that the 2004 and 2006 Dodge Ram Quad Cab both used the same bars. If you have the Westin Nerf Bars # 23-0500 or # 23-0505 you can use the Replacement Mounting Brackets # 23-050PK , but it doesn't appear that those are the correct bars to fit either of those trucks. Instead, the correct Westin nerf bars that are designed to fit the...
  view full answer...
• Recommended Running Boards for 2005 Dodge Ram 3500 Quad Cab
  Both the DeeZee Nerf Bars # DZ371233 and the Westin E-Series Round Nerf Bars # 23-2310 referenced in your question are confirmed to fit your 2005 Dodge Ram Quad Cab. Because of where the mounting brackets will attach, the DeeZee model will stick out a bit further from the truck than the Westin boards, allowing for easier access to its 3 inch wide step platform. Ground clearance will be very similar between the two running boards on your truck. The DeeZee Nerf Bars # DZ371233 is a really...
  view full answer...
• Installing Westin E-Series Tube Steps on 2003 Dodge Ram 1500 Quad Cab
  The installation of the Westin E-Series Tube Steps on your 2003 Dodge Ram is pretty simple and straightforward. The tubes attach to brackets that bolt to the body mounts under the truck. The bars include longer bolts that take the place of the OEM body mount bolts. We have an installation video showing a similar tube step being installed on a 2008 Ram. The install on your vehicle would be similar. To see the video, click on the link below.
  view full answer...
• Replacement Brackets for 3 Inch Nerf Bars on 2007 Dodge Ram Quad Cab
  Part # 23-232PK are the brackets for the Westin E-Series Round Nerf Bars # 23-2320 and # 23-2325 which fit the 2007 Dodge Ram regular cab. Since your Dodge is the Quad Cab the Westin Nerf bars that fit your truck that we have replacement hardware for are as follows: # 23-2315 (Black Steel) and # 23-2310 (Polished Stainless Steel) use hardware # 23-231PK # 25-2315 (Black Steel) and # 25-2310 (Chrome) use hardware # 25-231PK
  view full answer...
• Replacement Mounting Brackets for Westin Nerf Bars
  You can refer to the linked page that displays all six Westin brand round nerf bars (tube steps) that fit on the 2003 Dodge Ram 1500 Quad cab pickup. Use the photos to determine which one you have. Once you know which bars you have you can check on that item's page for the appropriate replacement mounting bracket kit. For instance if you have nerf bars # 23-2310 then the correct replacement mounting kit is # 23-231PK.
  view full answer...
• Replacement Installation Kit for Westin E-Series Round Nerf Bars 23-2310
  To install Westin E-Series Round Nerf Bars # 23-2310 on your 2005 Dodge Ram Pickup you'll use install kit # 23-232PK. This kit includes brackets and all required hardware. Installation instructions for these steps are linked for you.
  view full answer...
• Will The Westin E-Series Step Bars # 23-2310 Fit a 2003 Dodge Ram 3500 Dually
  The Westin E-Series Step Bars, part # 23-2310 will fit your 2003 Dodge Ram 3500 Dually. Just to be absolutely certain, I've confirmed the fit with my Westin representative.
  view full answer...
• Length of Westin E-Series Round Nerf Bars 23-2310 for Dodge Ram
  I spoke to Westin about the Westin E-Series Round Nerf Bars part # 23-2310 and they said the nerf bars are around 81" long.
  view full answer...
  
• Replacement Hardware for 3" Wide Westin Nerf Bars on 2003 Dodge Ram 2500 Quad Cab
  The correct replacement hardware will depend on the exact nerf bars you have on your 2003 Dodge Ram 2500. The 3" wide nerf bars from Westin and corresponding replacement hardware are as follows: -Westin E-Series Round Nerf Bars - Black # 23-2315 and Stainless Steel # 23-2310 -Replacement Installation Hardware Kit for Westin E-series # 23-231PK -Westin Signature Series Round Nerf Bars - Chrome Plated Steel # 25-2310 -Replacement Hardware for Westin Signature Series # 25-231PK
  view full answer...
• Does Westin Nerf Bar for 2005 Dodge Ram 2500 Require Ordering Additional Hardware
  The Westin Nerf Bars part # 23-2310 that you referenced come with all install hardware needed so yes, the part # 23-231PK would be included and would not need to be purchased separately.
  view full answer...
• Bolt Hole Dimensions on Westin E-Series Round Nerf Bars # 23-2310
  The measurement on the Westin E-Series Round Nerf Bars # 23-2310 is 6' from bolt-center to bolt-center. Nerf bars are designed to be vehicle-specific, so these actually only fit a Dodge Ram Pickup and won't fit your 2000 Ford F-250. For a set of nerf bars that are confirmed to fit your vehicle, you need the cab size of your vehicle. For example, if you have a regular cab, I recommend the Westin E-Series # 23-1320. These provide the same look and function as the boards you were looking at,...
  view full answer...
• Recommendation for Tube Step Running Boards on 2003 Dodge Ram Quad Cab
  For your 2003 Dodge Ram Quad Cab pickup truck, I recommend the Westin Tube Steps Running Boards # 23-2310 as the product you referenced, the Westin Tube Steps Running Boards # 23-2320, are intended for the 2-door model. The highly-polished stainless steel bars, 3 inches in diameter, extend the full length of the quad cab and the UV-resistant step pads will not fade or crack, even in the harshest conditions. They are attached easily with a no-drill installation and come with a lifetime warranty.
  view full answer...
• Replacement Nerf Bar Mounting Brackets for Westin E-Series Bars for 2005 Dodge Ram 2500 Quad Cab
  Do you know what nerf bars you have? If you had a set of Westin E-Series nerf bars like the ones you referenced the correct part number for the hardware kit would be the part # 23-231PK as the bars you'd have would be the # 23-2310. These aren't universal brackets that will fit all manufacturers so we'd need to verify the nerf bars that you have.
  view full answer...
• What Replacement Hardware do I Need for My Westin 3-Inch Nerf Bars on My 2008 Dodge Ram 1500?
  When looking for replacement mounting brackets for nerf bars, it truly depends on what model of Westin 3-Inch Nerf Bars. Also, it is important to note that replacement mounting brackets will only fit specific nerf bar models that are designed to fit specific years/makes/models of vehicles. This fact makes the process of buying secondhand nerf bars and running boards extremely frustrating. If you have the compatible Westin E-Series Round Nerf Bars - 3" - Polished Stainless Steel # 23-2310...
  view full answer...
• Westing E-Series Tube Step Recommendation for a 2009 Dodge Ram Quad Cab 1500 2500 3500
  Yes, we do offer a set of Westin E-Series 3 inch diameter tube steps that are confirmed to fit your 2009 Dodge Ram 1500 with a Quad Cab. You would want the part # 23-3550. If instead you have a 2500 or 3500 you would want the part # 23-2310 instead. Both of these tube steps will attach to the body and frame of your truck.
  view full answer...

Do you have a question about this Nerf Bars - Running Board?