Upgrade Kit for Kwikee RV Steps 90230825

Question

Question:

The number on my RV electric steps is 90230825. This is on a 2003 Newmar Scottsdale. Will this fit? Please let me know if part # LC29VR will fit and operate correctly as an upgrade to replace my old motor and gear box and controllers.

asked by: Greg A

0

Expert Reply:

I spoke to Lippert and confirmed the Motor Upgrade Kit for Kwikee Electric RV Steps part # LC29VR is confirmed for the Kwikee Steps 90230825.

expert reply by: Conner L

0

Answer 1

Hey Val, we have what you are looking for but since your steps are a bit older what you'd need is the Lippert Components Kwikee Step Motor Conversion/Upgrade Kit part #LC29VR. This will upgrade your steps to the current version of the 32 series…

view full answer...

Answer 2

I'm not entirely sure what the difference is between the old and the upgraded controllers aside from the fact that the old model doesn't have a direct replacement. They made a change to the steps after 2005 moving to the integrated system…

view full answer...

Answer 3

Since your Kwikee step setup shows that it's a Series 28 step the correct motor upgrade kit is the part #LC29VR that you referenced.

view full answer...

Answer 4

Hey Bill! The correct kit for your Kwikee 32 series with that S/N is the Motor Upgrade Kit for Kwikee Electric RV Steps #LC29VR. The kit comes with everything you need, including hardware. Any big trips coming up with your motorhome?

view full answer...

Answer 5

Thank you for the photo and there is an option to replace the motor on your Kwikee 32 Series steps, though you'll need a full upgrade kit to the new style of motor: - Motor Upgrade Kit for Kwikee Electric RV Steps #LC29VR

view full answer...

Answer 6

There are indeed many different replacement step controllers out there and I am happy to re-confirm that the correct current item to replace your Kwikee step controller 1800709 is part #LC363989. I verified this item with my parts contacts at…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Upgrade Kit for Kwikee RV Steps 90230825

Product Page this Question was Asked From

Continue Researching