Recommended Hitch Extender For My 2006 Silverado 2500 HD

Question

Question:

I need to extend my factory hitch 30” to clear my slide in truck camper. I will be pulling my Carolina Skiff boat that weighs about 3000 to include the weight of the trailer. What are my options. Please reply with options/recommendations and part#’s so I can order the correct parts for the proposed options. Thanks for your guidance.

asked by: Thomas O

1

Helpful Expert Reply:

When it comes to add a hitch extender on your 2006 Chevrolet Silverado 2500 HD with a 6-1/2 foot bed first you will need to install The TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2 inch Receivers # TLC1204. This hitch has a bolt on installation with no welding required and has a black powder coat finish that resists corrosion.

This hitch has a maximum gross trailer weight up to 17,000 pounds and has a maximum tongue weight up to 1,700 pounds. I would recommend checking your vehicle's manual to find out the proper towing capacity of your vehicle. Using this hitch will give you the 2 hitch head openings needed to use The TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 42 inch Long # TLE1542.

This extender gives you a 42 inch extension and has a maximum gross trailer weight capacity up to 6,000 pounds and has a maximum tongue weight up to 600 pounds. It has a sturdy steel construction and has a black powder coat finish that helps resist corrosion.

I attached a review video link below.

expert reply by: Noah E

1

Answer 1

Hey Bob, The TorkLift Cannon Hitch Extension #TLE1648 would be a good option if your F-350 has the factory 3" Ford receiver hitch and you're needing 48" of extension. You can measure to figure out the correct length needed, with or…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15809 is a great option for your 2011 Ram 2500 as long as you are okay with a 24 inch hitch extension like #C45048. This will give you a gross trailer weight of…

view full answer...

Answer 3

Hey Bill, We do carry the TorkLift SuperTruss 48" version. We have one that fits into the normal 2" TorkLift hitch, as well as one that fits the Ford factory 3" receivers. For your normal TorkLift hitch you want to go with #TLE1548, if…

view full answer...

Answer 4

If you have a 2-1/2 inch size trailer hitch (opening of the hitch measured) then you could use a longer extension like the #C45048 which can be between 24 and 34 inches long. Most extenders don't have a whole lot of weight capacity but this one…

view full answer...

Answer 5

The only TorkLift trailer hitch that fits your 2005 GMC Sierra 2500 short bed is #TLC1204. This is the SuperHitch Original Class V hitch with dual 2 inch receivers. It is rated for 1,700 pounds tongue weight and 17,000 pounds gross trailer weight.…

view full answer...

Answer 6

If you use the Curt hitch extender part #C45048 in the 24 inch length with a weight distribution system the towing capacity is 8,000 lbs. If the 24 inch length would work for you this would be a great option.

view full answer...

Answer 7

I wish you would have asked this question prior to your purchase of the Curt Extender #C45791, because this extender will not work for your application. It is rated for the 3,500 lb total trailer weight towing capacity and because it is an adapter…

view full answer...

Answer 8

I have a possible solution, but none of the 14-16" extensions have a high enough capacity. The only thing that comes close is the Gen-Y #GY89SR which has a gross towing weight of 10,000 lbs, but the max tongue weight is only 500 lbs. This would…

view full answer...

Answer 9

Thanks for the pictures! My main concern in recommending a shorter extension, like the 36" TorkLift SuperTruss item #TLE1536, is clearance when making turns. The 36" would clear your camper and allow you to install your tow bar without…

view full answer...

Answer 10

I have another option for you, but the TorkLift Cannon Hitch Extension - 3" Ford Super Duty Factory Hitch - 48" Long #TLE1648 you were looking at is only a fit for the factory 3" trailer hitch receivers on a 2017 or newer Ford Super…

view full answer...

Answer 11

for your 2013 Ford F-150 the TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2" Receivers #TLF1005H will partner with the factory hitch on your truck. It is designed for 6-1/2 foot bed trucks which is what it…

view full answer...

Answer 12

The proper extension for your setup would be the one that allows you to have clearance of your hitch mounted accessory and also allows you to still be able to pull the steps down. If the receiver tube sticks out past the camper too far then you will…

view full answer...

Recommended Hitch Extender For My 2006 Silverado 2500 HD

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching