Are The Yakima OverHaul HD Ladder Rack And BAK Revolver X4S Compatible With Truxedo TS Elevate Rails

Question

Question:

Im seeing differing opinions. I have the Yakima Overhaul HD rack and want to pair it with the Bak Revolver X4S cover. Will the Overhaul HD with the tonneau cover adapter fit with the Elevate TS Rails?

asked by: Ryan

0

Expert Reply:

Yes, TS Rails like the # TH75FR are compatible with both the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover - 60" Crossbars # Y01151-5755 and a BAK Revolver X4S cover like the # BAK24ZR.

If you could provide me with the year/make/model of your truck I could find the correct BAK cover to fit your application.

expert reply by: Kevin C

0

Lee M.

1/6/2025

Not the OP, but I'm looking to do the same on a '21 F350 crew cab w/ the 6'9" bed. I actually have an BAK X2 Revolver and was wondering if I could just swap out the Rail Kit w/ the TS rails from the Revolver X4, then add the Yakima OverHaul HD to that?

Kevin C.

1/7/2025

@LeeM The TS rails # TH75FR just clamp between the tonneau cover and bedrails so you could just sandwich it between them and your X2. They've been confirmed to work with the X2 as well so you shouldn't need to swap out your cover's rails.

Lee M.

1/7/2025

@KevinC - Thanks! OK, so instead of replacing the full rail w/ the new Revolver rails with the integrated track, I can just add the TS rails, then mount the Yakima Overhaul HD to that? Would I need the Yakima Tannoue kit 1 for that? Also, I checked, and I actually have the original X4 (not X2, not X4s), if that makes a difference.

Kevin C.

1/7/2025

@LeeM Yes, you would just unclamp the rails from the bed, slip in the TS Rails # TH75FR, and then clamp them back down. You're correct that you'd also need the tonneau cover adapter kit # Y01155 in order for the OverHaul HD ladder rack to connect. The TS Rails would also be compatible with the X4 as well so no problem there either.

Answer 1

Hey Robert, yes the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855 that you referenced will fit the T slots of the BAK Revolver tonneau cover that you have. What are you planning on carrying on the…

view full answer...

Answer 2

The BAK Revolver X4 is not going to work with the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5855, you'd need to use either the Retrax XR, Ford Embark LS, or the Pace Edwards UltraGroove.

view full answer...

Answer 3

The Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob #331-TPSI-001 is going to require a 1" diameter hole in order for it to fit in your blank panel spot. The face of the panel is approximately 1-1/16" wide…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Jonathan, congrats on the new truck! The Universal Mounting Panel item #331-TPSI-001 is what you'll need to install the control knob of the Redarc Tow-Pro Liberty item #RED53CR in your 2026 Nissan Frontier SV. It measures 1-8/16" tall x…

view full answer...

Answer 7

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Hey Alexander. The Universal Mounting Panel item #331-TPSI-001 is what you'll need to install the control knob of the Redarc Tow-Pro Liberty item #RED53CR in your 2024 Nissan Frontier. It measures 1-8/16" tall x 1-1/8" wide. There are…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Are The Yakima OverHaul HD Ladder Rack And BAK Revolver X4S Compatible With Truxedo TS Elevate Rails

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching