Base Rails To Fit Companion Hitch Head to 2022 Chevy Silverado 3500 OEM Prep Package  

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

The heads on all of the B&W Companion hitches are indeed the same and thus interchangeable among the different bases. So swap in confidence!

GM changed the puck dimension from the year 2019 to 2020 but prior to that the size and fifth wheel fits are all the exact same. The B and W Companion part #BWRVK3715 is a fit for the new puck design in 2020 but if you had a OEM rail kit made earlier…

The answer to your question will depend on which B&W Companion you have and whether or not you have the OEM prep package right now or not. I also don't know which bed size you have but I will assume it will remain the same between the old and…

Hey Richard! Great question. All you have to do is swap out the base to make it compatible with the prep package in your 2025 GMC Sierra 3500. If you still have a short bed and need the slider the correct base is the #BWRVB3775. If you have a long…

Hey Larry, thanks for reaching out! The puck locations for a 2021 Ram truck will be different than a 2025 Chevy 2500 so we need to either swap out the base or get you a whole new Companion. To replace the base that fits with your Chevy puck system…

The head #BWRVC3006 you have now has a 25,000 lb GTW so it is compatible with the higher rated base #BWRVB3715. As far as the settings go, it might not be the same as it was for your old setup. There are a lot of factors, especially on the truck, so…

Good question Mel, and I don't blame you for being confused since there are a lot of options and there is probably more than one right answer. The correct pivot arm position will depend on the clearance between the nose of the camper and the cab…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…