Will the Optronics Fleet LED Trailer Tail Lights Fit 6-1/2 inch x 2-5/8 Inch Cutout?

Question

Question:

I have noted the correct cut-out size is 6.6875inch x 2.625. I need to mount the light in a 1/4inch thick piece of metal. Will this thickness be an issue with the grommet fit?

asked by: Chris W

0

Expert Reply:

You won't have any issues. The Optronics Fleet LED Trailer Tail Lights w/ Grommets item # TLL12RK has the exact dimensions you will need. The rubber grommet should have no problem fitting inside your cut out. I have linked a diagram below.

expert reply by: Jerred H

0

Optronic Grommet Dimensions
(click to enlarge)

Answer 1

The light dimensions of the Optronics LED #TLL12RK are 7-9/16" long x 2-3/4" tall x 1-3/4" deep and the hole size needed is 6.75" by 2.5 inches. I confirmed this with my contact at the manufacturer and I've attached a template…

view full answer...

Answer 2

Hey Ted, thanks for reaching out. I went out to our warehouse and measured the Dexter Light Box Guard #DX99VC. The oval cutout is indeed 6-1/2" long x 2-1/2" tall. The 2" side light is supposed to be just a clearance light for…

view full answer...

Answer 3

Hey Ari! Thanks for reaching out! The LED Trailer License Plate Light #LPL91CB will be a great replacement for your license plate light. This one has a clear lens with white LEDs and is only marginally different in size, measuring 2-1/2" x…

view full answer...

Answer 4

Hey Mark, thanks for reaching out, and good question. That “16/18 gauge” wording throws a lot of people off. The TowSmart 16 to 18 Gauge, 4 Conductor Wire #TS57QR isn’t all one size. It’s a 4-conductor cable with mixed gauges inside, two wires are 16…

view full answer...

Answer 5

Hey Patrick, when wiring in the X LED Truck and Trailer Tail Light part #BUL602CRB the white wire is the ground, black is the taillight function, and then red is for the reverse light and it is what activates the white LEDs. I am sure it's just…

view full answer...

Answer 6

Hey Clint, since the factory tire size of your 2026 Chevy Silverado 2500HD is right at 35 inches in diameter that size spare would fit with the Torklift hitch part #TL74FR installed. Are your tires the stock tires that the truck came with?

view full answer...

Answer 7

It sure is Robert and I would definitely say it's time for a replacement! The WFCO Auto Detect RV Converter and AC/DC Distribution Panel item #WF86FR is indeed a direct replacement for your WF-8955PEC. The WFCO Auto Detect RV Converter and AC/DC…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Will the Optronics Fleet LED Trailer Tail Lights Fit 6-1/2 inch x 2-5/8 Inch Cutout?

Product Page this Question was Asked From

Continue Researching