To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Some covers only lock in a few preset spots, but this one gives you total control. The RetraxPRO MX slides smoothly along its rails and can be latched anywhere you want using the built-in locking handle. You can keep the cover partially open to protect smaller gear near the cab while leaving space for longer items at the tailgate. When it’s fully closed and locked, the flat, concealed handle design keeps thieves out and your cargo completely secure.
Rain, snow, and road grime are no match for the 1-inch-thick aluminum panels and full perimeter seals. The weather stripping and foam gaskets close off gaps along the rails and tailgate so moisture and dust stay out of the bed. The matte black finish resists scratches and fading, and the aluminum panels are impact-resistant to handle debris or heavy snow loads up to 500 lbs evenly distributed.
You don’t have to fight with latches or straps to open this cover. Sealed ball-bearing rollers let it glide effortlessly along the rails without binding or needing lubrication. Because there are no hinges, joints, or springs to wear out, the movement stays consistent through hot, cold, and dusty conditions. The pop-up handle gives you one-handed control from either side of the bed.
When you need the full bed, the cover retracts into a low-profile canister at the bulkhead. The spiral track inside keeps the panels from rubbing together, preventing wear and sticking. The angled bottom takes up less space, leaving room underneath for extra gear. Two included drain tubes route water from the canister through factory holes so the stored cover stays dry.
With rails that sit just 1" above the bed and wide edges that overlap the sides, the RetraxPRO MX has a flush, integrated appearance instead of a bulky add-on look. The matte black finish blends cleanly with the truck lines while holding up against sun and weather. It’s a cover that protects your cargo and still looks sharp year after year.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the RetraxPro MX Hard Tonneau Cover in matte black. You can upgrade your old tonneau cover and not have to worry about any snapping or hook and loop connections. The RetraxPro MX Hard Tonneau Cover is the best way to cover up your truck bed. One of it's great features is, it can be locked anywhere along the rails you please. It's perfect for keeping your gear dry, covering up that fifth wheel head and you can even use it to secure your elongated cargo. The latch itself doubles as a handle. When you're ready to lock it, it sits flush within the cover and you can lock it up with the included keys.
When you've done that you can put the cover over top. The whole thing rolls up into the flush mounted box for a low profile design. It only takes up about 12 inches of space behind your cab. It's a simple clamp on installation and the rails only sit about an 1-1/4" high on top of our truck bed rails. Here on the inside they take up about 1-3/4". The sealed ball bearing rollers within the cover make opening and closing easy.
And because they're sealed, they're maintenance free. The whole thing is made out of an industrial strength aluminum, it's gonna keep out the elements and it can support distributed loads of up to 500 pounds. When used with the locking tailgate, it's furthers your security. The whole thing is UV protected and it features a limited lifetime warranty. It's an easy no drill installation, it simply attaches to your truck bed rails with the provided clamps. And that's going to complete our look at the RetraxPro MX Hard Tonneau Cover.
Ratings & Reviews
Pretty stellar product. No buyer's remorse on this end.
The RetraxPRO MX Hard Tonneau Cover does leak more water then I thought it would or was lead to believe it would. Also, I thought it would lock in different locations when it was rolling in or out but it doesn't. Question is would I buy it again most likely not because of the issue with the leaking water & not locking in different positions everything else is what I thought it would be, thank you.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.