Finding the Correct Vehicle Wiring Harness For 2011-2020 Dodge Journey LED & Incandescent Tail Light

Question

Question:

I am trying to purchase the correct wiring harness for my 2013 Dodge Journey. From the pictures I can’t tell which one I need, and I don’t know what kind of bulbs I have in my vehicle. I took a picture of the connector in hopes this could help to determine which one I may need. Please let me know what you suggest.

asked by: Brandi F

0

Expert Reply:

I can help you identify your tail lights as the images you sent are of a connector that is not part of the taillight wiring on your 2013 Dodge Journey. I have attached images of the LED and incandescent taillights that your Journey could have. The easiest way to tell the difference is with the clear reverse light. The LED is a single clear bar while the incandescent has 2 clear bars for the reverse lights.

The T-One Vehicle Wiring Harness # 118567 fits the incandescent tail lights.

The T-One Vehicle Wiring Harness # 118536 fits the LED tail lights.

expert reply by: Bud M

0

2011-2020 Dodge Journey Incandescent Tail Light
(click to enlarge)

2011-2020 Dodge Journey LED Tail Light
(click to enlarge)

Connector On Rear Of 2013 Dodge Journey
(click to enlarge)

Answer 1

For your 2017 Dodge Journey we can certainly help you pick out the correct hitch and wiring. For a hitch you'd want to start with the Curt hitch part #C13201 which is a confirmed fit and will work well. This hitch has the best capacities and…

view full answer...

Answer 2

The easiest way to determine if you have LED or incandescent lights on your Dodge Journey is to simply watch them illuminate and turn off. If they come on immediately and turn off immediately then they are most likely LEDs. LEDs will also be quite a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Easiest way to tell is to watch the lights illuminate. If they come on immediately with basically zero transition between off and on and are almost painful to look at you have LEDs. If you can watch the bulb get brighter and looking at the light…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Finding the Correct Vehicle Wiring Harness For 2011-2020 Dodge Journey LED & Incandescent Tail Light

Continue Researching