To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Say goodbye to the hassle of cutting and splicing wires. The Curt T-Connector Vehicle Wiring Harness provides an easy plug-and-play solution to get your trailer lights up and running swiftly. This custom-fit harness connects directly to your vehicle's wiring system with no modifications needed. Simply plug in between your vehicle and tail light assemblies, and you're ready to hit the road.
Worried about dirt and moisture compromising your trailer connection? This harness comes with a handy dust cap for the 4-way flat connector, ensuring your setup remains clean and operational even in harsh conditions. No more headaches from corroded connections—just reliable performance every time.
Enjoy versatility with compatibility for 5-pole, 6-pole, and 7-pole adapters (sold separately). Whether you're pulling a small utility trailer or a larger rig, this harness has you covered. It adapts to various setups with ease, making your travels more flexible.
Extend the life of your electrical setup by applying a small amount of grease on connections. This simple step helps prevent corrosion and ensures your electrical connections remain robust over time. It’s the little touch for long-term reliability.
The Curt T-Connector Vehicle Wiring Harness is specially tailored to fit behind the driver’s-side and passenger’s-side tail lights. This ensures a secure fit that works in harmony with your vehicle's design. Say goodbye to the frustrations of ill-fitting wiring—installation is smooth and seamless.
Keep your trailer wiring neatly stowed beneath your vehicle when not in use. With an optional mounting bracket (sold separately), you can easily secure your 4-way connector to maintain an organized look. It's a perfect solution for reducing clutter and ensuring a professional appearance.
California residents: click here
This was the first time I have ever purchased a direct plug-in for trailer lights. The look and ease is just too professional to ever go back to splicing in a $5 flat plug ever again.
This was a very affordable hitch it was delivered promptly and the install was very easy thanks to all the mounting bolts and brackets that are supplied with hitch the little snake tool they included made it super easy to guide the bolts into posistion thankyou very much
Very easy plug and play.
Work great!!!!
Fast shipping
Did not work for my vehicle-but I adapted it
As always, Curtis products excelled.
The kit was easy to install and my trailer lights work perfectly!
I love the set up. Easy to install. Unfortunately I ordered the wrong part number needed for my car. Didn’t realize that a portion of tail rear lights are LED. So read carefully the description and make sure your part will fit.
Abel H. 
3/23/2023
I ordered the correct part and it worked and continues to work perfectly
Great product. I've hard wired my own trailer connectors in the past but this is the way to go! Couldn't get any easier. I'm glad my vehicle didn't have the LED tail lights otherwise I would have needed the other model that requires running a power wire to the front of the vehicle.
Harness is not suited for a Dodge Journey. No place to secure the power pack and it keeps coming down and pulling the wiring out. Also causes problems with the cars rear light system. Took it to dealer and decided not to pay the exorbitent price to have it secured permanently.
William
6/1/2022
I have a 2018 Dodge Journey with LED lights so I needed the converter to hook it up. The Converter does not fit well in the light area and its very hard to keep in place. Need to make it smaller or have some kind of magnet or velcrow which would enable easier hook up.
Ordered a wiring harness and it arrived promptly. It was very easy to install with easy to follow instructions. Would definitely recommend this product to everyone.
Darren C.
6/12/2019
Still works fine.
The trailer wiring for my 2013 Journey SE, fit perfect and was easy to install (once I figured out how to unplug the factory plugs, there are small tabs that need to be depressed before unplugging). Wiring length was good, connectors were high quality. This was way better than the old fashion method of cutting and splicing. Well worth the money to do it right. My journey was the 4 cyl with incandescent bulbs.
The only thing I found wrong was the instruction sheet was incorrect. The way they are written the ground wire should have been on the drivers side, but was not, it was on the passenger side. Other than that it was great. When I bought this car brand new I had the Dodge dealer install a trailer hitch and wiring. They must had installed it wrong because it never worked right, and after awhile it did not work at all. Then the horn started blowing by itself, at all times of night. Now that I have removed that and installed this one the horn has stopped blowing by itself and my trailer lights work right.
I spent close to $160 getting, what they said was, the wire harness for my vehicle from [rental trailer place]. After 2.5 hrs of trying to install, I read more online to find out it was incompatible. So I searched online and found etrailer harness that cost less than 25 including shipping. I installed it in about 30 minutes and it works great. A couple plugs and routing the wires was all it took. I will come back to etrailer for future trailer needs. Thank you.
Great product, simple straight forward installation, directions are spot on. Extremely better than trying to splice wires. The only thing to add is a piece of wire loom to run wipers thru so when wires are zip tied to hitch it looks like professionall installation.
I ordered a trailer wiring harness and a mounting bracket for my Dodge Journey. My order arrived in two days. I received what I had ordered and it was what I needed. The installation instructions were good and the shipping notification and follow-up were excellent. Like other reviewers, I highly recommend etrailer.com.
Installed wiring harness on a 2015 Dodge Journey SE w/ halogen taillights. I chose this harness so I did not have to cut or splice any of the manufacturer's wires. The instructions were easy to follow and all connection were perfect. Installation took around 30 minutes
Easy install. Works great.
Great company I have ordered from them before products are always as stated and shipped fast and delivered ahead of the time promised. Today I installed the hitch and light kit I received in about a hour. Will continue to purchase from this company as needed.
Thanks to all at Etrailes
TZ
Plug and play. Very simple installation of the harness by removing the taillight lens assemblies, pug it in between the veh harness and the light bulb socket and run the harness to the hitch. Takes only minutes. Make sure to get the wires connected to the correct side of the car.
Worked well for the journey. I used the basic harness for incandescent bulbs. Easy to install.
Trailer J.
11/29/2016
Still working well. No problems with this setup.
This wiring setup is well-made. There is not enough emphasis on color codes. The easy way to remember right from left is to remember your L's - yellow left. Perhaps more emphasis needs to be made on keeping wires clear of areas such as the exhaust system.
Brian G.
4/3/2020
This was a perfect wiring setup for my car. Easy to install. Works perfectly. Great product.
It looked well made but couldn't use it due to wrong wiring ends for our vehicle
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
10/31/2024
Hey Daron. The 2016 Dodge Journey had two different light options, LED and incandescent. Harness part # C56109 would be for incandescent taillights and part # C56330 would be for the LED version. The plugs are different between the two harnesses so one can't work on the other.