Outside Dimensions of Trailer Dust Cover
Updated 09/09/2013 | Published 09/05/2013
Question:
I have a 2012 16ft Rc trailer I am not sure if it is the RST ir The RTT series that I need to replace the dust cover can you narrow down the ouside dia. that I would need
asked by: Steve
Expert Reply:
The best way to determine which dust cap to consider is by taking apart one of the hubs and to get the numbers off the outer bearing and race. You can also get the hub bore inner diameter using dial calipers to get that measurement. I have linked you to our grease cap product page.
The dimensions for the Lubed Dust Cap & Rubber Plug, part # DC200L-DCRP, that you referenced in your question are. Outside diameter is 1.99 inches. The inner diameter of the top hole for the rubber plug is 1.18 inches and the overall height is 1.43 inches.
I have attached some photos that show you the dimensions mentioned above.
I also linked you to a video that explains how to remove and reinstall trailer hubs.
Product Page this Question was Asked From
2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.98 Inch O.D.
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Search Results: trailer bearings races seals caps
- Shop: Flash Simple Heavy Duty 2-Ball Mount - 2-1/2" Hitch - 10" Drop, 10" Rise - 18K
- Search Results: dust cap plug
- Search Results: bearing 15123 trailer bearings races seals caps
- Search Results: axle dust caps
- Search Results: 15123
- Search Results: 25580 bearing
- Search Results: dust caps
- Shop: Grease Cap Plug for Dexter Axle E-Z Lube Grease Caps - Qty 2
- Shop: Dexter Grease Caps with 2.446" OD - Fits 12" x 2" Hubs - Zinc-Plated Steel - Qty 2
- Video: In-Depth Review of the Grease Cap, 2.44" OD Drive In with Plug
- Shop: Karrier ST225/75R15 Radial Trailer Tire - Load Range D
- Shop: Trailer Hitch
- Article: How to Measure for Trailer Hitch Drop
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Q&A: Grease Cap and Dust Cap Needed for Trailer Bearings
- Q&A: Dust Cap Recommendation for Ranger Trail Boat Trailer 9606087
- Q&A: How to Choose a Grease Cap for a Trailer that Does Not Have Grease Caps
- Q&A: Is Sealant Needed When Replacing Grease Seals and Dust Caps
- Q&A: Determining Correct Grease Seal and Dust Cover for Dico 45264 Hub on Boat Trailer
- Q&A: Correct Replacement Bearing and Grease Cap for a Dexter Axle
- Q&A: Availability of Replacement Dust Covers That Fit Over Hub Bore
- Shop: Replacement Center Plug for Kodiak XLProLube Oil Bath Cap - Qty 1
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Shop: Grease Cap, 2.44" OD Drive In with Plug - Qty 2
- Video: Remove and Reinstall a Trailer Hub Review