Replacement Legs For A Venture M-9000-PK Landing Gear

Question

Question:

What landing gear legs do I need the only numbers I found were on the motor it said venture m9000pk serial number 9000 172463.

asked by: Mike

0

Expert Reply:

For your Venture M-9000-PK, you can use the Replacement Lead Leg for Venture 5th Wheel RV Landing Gear # LC119102 for a lead leg, and the Replacement Follow Leg for Stromberg Carlson Landing Gear # LG-177201 for a follow leg.

expert reply by: Bryce D

0

Answer 1

The good thing is that the switches are pretty much universal. For your 2021 Forest River XLR Boost 5W Toy Hauler, I recommend replacing your switch with the Replacement Switch for Stromberg Carlson Electric Landing Gear Item #LG-145236. If you have…

view full answer...

Answer 2

The picture you submitted shows the motor (MPD 71119 ) for a standard Atwood landing gear jack set like the Stromberg Carlson kit part #LG-1. If you are wanting a direct replacement you would want the part #LG-1 as Atwood is no longer in business and…

view full answer...

Answer 3

While I don't know exactly what landing gear you have on your 2011 Keystone Raptor 3812 Toy Hauler, I can say that you should be able to replace them with the Landing Gear Set w/ Handle #RVLG-8HDL as this landing gear uses the standard weld mount…

view full answer...

Answer 4

Hi John, you’re definitely looking in the right place and I can help clear this up so you’re not guessing. For your 2021 Rogue Armored 351 G2, the correct MORryde X-Factor crossmember is the standard version part #MR33WR, and in most cases you will…

view full answer...

Answer 5

The Venture VMC900R is a very common landing gear set so for replacement legs we know you need the part #LC119102 for the lead leg and #LC119101 for the follow leg. Since you are wanting to fix the issue as cost effective as possible I would…

view full answer...

Answer 6

It could be some internal parts but it could also be the electrical system itself. The easiest way to know if the internal parts are the issue or not is to use the manual override to see if it will extend and retract without any electricity. If it…

view full answer...

Answer 7

Thanks for the pictures. You won't need to replace the entire landing gear set. For your Venture landing gear on your 2002 Forest River Cedar Creek Fifth Wheel you will want item #LC119102 for the lead leg or item #LC119101 for the follow leg.…

view full answer...

Answer 8

Hey Patrick, thanks for reaching out. Yes, the Replacement Front Jack Leg #LC362485 should work for your 2021 Open Range 314RLS with the Lippert Ground Control 3.0 system. Since your weld stop “bump outs” measure 17-1/2" apart, that matches the…

view full answer...

Answer 9

I checked the parts list for the Ground Control 3.0 Electric Leveling System #LC358590 (4-Point Set) or #LC675817 (6-Point Set) and the jack tube by itself is not available as a replacement part. Due to that if you need a replacement leg you will…

view full answer...

Answer 10

There really isn't a difference between the #LC119101 and #LC179014. One is just listed for Venture landing gear sets and the other Lippert. They are both identical though.

view full answer...

Answer 11

The Extension Hose for SewerSolution Macerator System #SS25 that you referenced would work for you. It's the same diameter as you need and could be cut down to 20 foot like you want as well.

view full answer...

Replacement Legs For A Venture M-9000-PK Landing Gear

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching