How to Find Bearing Buddy Size for 5 x 8 Lowes Utility Trailer
Updated 03/21/2022 | Published 03/18/2022
Products Featured in This Question
Question:
I have a 5x8 Lowes utility trailer. I bought a set of bearing buddys that I thought would work and it matched the cap that was on there when you put them side by side but would not go in. Do you have any idea from your experience what the size would be for a trailer that small?
asked by: Erik G
Expert Reply:
In order to find the right bearing buddy size for your 5x8 Lowes utility trailer you are going to need to measure the inside diameter of your hub bore. You will need a very accurate measurement so I recommend using a digital caliper like the # PTW80157.
Once you have this measurement you will be able to match it up with a bearing buddy if one is available. For example, if you get a measurement of 1.980" then you would be able to use the Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair) # BB1980A-SS you looked at.
I have attached an installation video along with a link to all of our bearing buddy bearing protectors which you can filter down by hub bore diameter.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.99 Inch
- 2000 lbs Axle
- 2500 lbs Axle
- 3500 lbs Axle
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK1-100
- Q&A: Which Replacement Wheel Bearings for Lowes Carry-On Trailer
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Q&A: How To Find Correct Replacement Bearings and Hub for 5 x 8 Utility Trailer
- Q&A: How Do I Determine What Bearing Sizes I Need For My Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Reverse Lockout Solenoid For Dexter DX12.5 Actuator
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Is There Fas-Top Topper that Fits 2024 Ford E-350 Long Bed
- Q&A: Difference Between Bearing Buddy 1980 Models
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)