Trailer Coupler Lock Recommended for 2015 Airsteam Flying Cloud with 2-5/16 Coupler

Question

Question:

Does this hitch lock fit a 2015 Airstream Flying Cloud 2 5/16 coupler?

asked by: Stephen A

0

Expert Reply:

The etrailer # e87ZR trailer coupler lock is compatible with pre-2000 Airstream couplers with a rolled lip at the bottom of the coupler. The lock is compatible with 2-5/16 couplers.

expert reply by: Mike L

0

Answer 1

The curve in the Malone Anti-Rattle HitchLock System part #MPG908 is designed for extra stability to not allow the shank of the accessory to move up and down. It is what holds the shank of accessory tight. I have attached a photo of how this is…

view full answer...

Answer 2

I went out to our demo warehouse and put together the Malone Canoe Hammock's (part #MPG346) catch pulley together with both ropes to experiment a bit with how the pulley catch worked. What I found out is that the catch is very solid and exactly…

view full answer...

Answer 3

Hey Mark, thanks for reaching out! We have a great selection of kayak load assists, but the only thing remotely close to a winch that I can think of is the Malone Kayak Hoist #MPG346, which is for kayak storage. Since you're already using Thule…

view full answer...

Answer 4

Thank you for the details and photo! To install the Malone Kayak Hammock Hoist System #MPG346 for your kayak I definitely recommend running the kayak perpendicular to the joists and add some supporting 2x4s between the joists in question. Joists are…

view full answer...

Answer 5

The length I'm finding for a 2022 InTech Sol Dawn travel trailer is 16' so I recommend the Adco Olefin HD All-Climate + Wind RV Cover for Travel Trailer #AD37ZR. The Olefin HD travel trailer cover works best for long-term storage in all…

view full answer...

Answer 6

For your Rhino-Rack Pioneer Platform Roof Tray #RR95TB, you are going to need to use the Rhino-Rack Ski and Fishing Rod Carrier Brackets for Pioneer Platform Rack #RR43159 to then be able to mount the Rhino-Rack Ski and Fishing Rod Carrier #RR572 to…

view full answer...

Answer 7

The 195860 code you mentioned is for a center or rear jack of a LCI Hydraulic Leveling system, so the Replacement Hydraulic Jack Assembly for Lippert Level Up System - 8,000lbs #LC36VR is a match to replace your current jack. It has a weight capacity…

view full answer...

Answer 8

For the hydraulic Level Up system you have on your 2014 Big Country 3700FL the replacement jack legs for all positions according to Lippert is the part #LC36VR.

view full answer...

Answer 9

The rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. So your 14,000 pound trailer would have a tongue weight between 1400 lbs and 2100 lbs so any trailer jack rated over 2,500 lbs would be sufficient to lift the…

view full answer...

Answer 10

Yes, the B&W Biker Bar Motorcycle Tie-Down Systems all use the same base and anchor kits. So all you would need to do is buy the Replacement Clamping Bar for B&W Biker Bar Motorcycle Tie-Down for Harley-Davidson Touring #BWMC2301B and replace…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...