Blaylock Industries Trailer Coupler Locks - Surround Lock - BLTL-34 Review

content loading



Customers compare BLTL-34 to these similar products




Products Featured in this Video



Review of Blaylock Industries Locks BLTL-34


Today were going to review part number BLTL-34. This is the Blaylock Easy Lock Trailer Coupler Lock for 2 5/16 ball couplers that have a flat or a rolled lip. This coupler lock will prevent theft of your trailer on a trailer that has a ball coupler that has the flat or the rolled lip. Basically this lock would fit over the couplers lip and it fully surrounds where the hitch ball would normally hook to and it will block access to the hitch ball opening. Im trying to give you an example here. I pulled a coupler that fits on a 2 5/16-inch hitch ball just to demonstrate how this lock would work, and again basically as you can see it has the rolled or flat lip right here all the way around, so basically you would just put this over that.

Theres a pin down here that you would just push up. Its a 5/8-inch diameter steel pin that you just push up and then at the very front is the lock. You just push that button in, and that would lock the pin into place, and that will prevent that lock from coming off the coupler, and it also prevents anybody from hooking onto your coupler itself. The push button lock is in the front so it gives easy access. It has a recessed tumbler right there which will add extra security.

Now you can order this part with a keyed alike option. Basically, when you go to order it you just select the keyed alike and you can order multiples of this same lock keyed alike or you can get it keyed to the same as your other push button Blaylock locks you might own. It is made of an aircraft grade lightweight aluminum which is strong and resists wear and corrosion. The two keys, right here, are included. It is made in the USA.

Ill just show you how to remove it. You just put your key right into the lock and just turn it and the pin will drop out and then you can just slide your lock right off. And, again, the application is for 2 5/16 ball couplers that have the flat or the rolled lip. Now one other measurement, it will fit a maximum coupler width including the lip of 4 -inches. So basically on this coupler like I have here, the width of it cannot be any more than 4 inches for this lock to slide on.

Basically, theres the 4 inches that you want it to fit on to. And again this pin diameter, this steel pin, is 5/8 of an inch. The weight on this is about one to two pounds. That should do it for the review on part number BLTL-34, the Blaylock Easy Lock Trailer Coupler Lock for 2 5/16 ball couplers with the flat or rolled lip.


Questions and Comments about this Video

add comment

Info for this part was:

Written by:
Lindsey S
Edited By:
Leah B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.