Recommended Weight Distribution Hitch for a 2018 Jeep Wrangler JL Unlimited 4" Drop
Updated 03/17/2022 | Published 03/16/2022
Products Featured in This Question
Question:
I am looking for a weight distribution hitch for my 2018 Wrangler JL Unlimited Sport. 3500 lb GTW, 350 TW. I have heard that Wranglers should NOT use weight distributing hitches because it will twist the crossmembers. Is this true? My trailer with my Harley inside is 2200 lbs, about 50 of my Wrangler. I am currently using a ball mount with a 4.5” . What would you recommend if I can use a WD hitch? Most of the ones I have looked at do not accommodate 4.5" drop.
asked by: Robert D
Expert Reply:
I have never heard of a weight distribution hitch twisting the rear crossmember on a Jeep Wrangler. If one were to twist the user was likely not using the correct weight hitch or overloading his Jeep.
For your 2018 Jeep Wrangler JL Unlimited Sport I recommend the Equal-i-zer Weight Distribution # EQ37061ET. This hitch is rated for trailers with a tongue weight of 200-600lbs and total trailer weight up to 6,000lbs. You will need the Equal-i-zer Weight Dist Shank # EQ90-02-4600 since the hitch does not come with a shank. This shank will give you a 4" drop and also extends out an extra 6" than a typical weight distribution hitch allowing for more room to work around the spare tire on the back of your Jeep as well as giving you some more room to open the rear cargo door.
A 1-7/8" 12pt Thin Walled Socket # ALL643216 is needed to install the 2" hitch ball that comes with the hitch. Or we have the 2-5/16" Hitch Ball # EQ91-00-6100 if you have the larger 2-5/16" coupler.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Shank Not Included
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: All Parts Needed to Flat Tow 2014 Chevy Silverado 1500 Behind Motorhome
- Q&A: Recommended Flat Tow Setup for Blue Ox Tow Bar on 2008 Honda CR-V
- Q&A: Will The Blue Ox Patriot Braking System Work On a 2023 Jeep Wrangler 4xe?
- Video: Setting up the Roadmaster Direct-Connect Base Plate Kit on your 2020 Jeep Wrangler Unlimited
- Shop: Vehicle Tow Bar Wiring
- Shop: Roof Rack
- Shop: Trailer Hitch
- Shop: Vehicle Tow Bar Brake System
- Shop: Trailer Wiring
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Base Plate for Tow Bar
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord
- Shop: Roadmaster Battery Charge Line Kit for Towed Vehicles
- Q&A: Can Reese Weight Distribution RE34FR Be Used with 2020 Toyota Highlander
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Shop: WFCO Auto-Detect RV Converter Charger - Deck Mount - 12V - 45 Amp
- Shop: WFCO Auto Detect RV Converter and AC/DC Distribution Panel - 12V - 55 Amp
- Q&A: Recommended Cover for a Sunset Park RV Sun-Lite 16BH
- Q&A: Recommended Weight Distribution Hitch for 3500-lbs Trailer
- Video: A Closer Look at the 12V RV LED Puck Light
- Search Results: rp66086
- Video: An In-Depth Look at the Curt TruTrack Weight Distribution System w/ Sway Control
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Search Results: trailer wiring
on Weight Distribution Hitch
