Trailer Hitch Fit for 2019 Hyundai Ioniq Plug In Hybrid

Question

Question:

Wil this hitch fit my plug in Ioniq hybrid?

asked by: Eric A

0

Expert Reply:

Unfortunately, none of our hitch manufacturers offer a hitch that's compatible with the Hyundai Ioniq plug in hybrid.

If you were needing the hitch to carry bikes, a trunk mounted bike rack like the Yakima Fullback # Y02634 2-bike or # Y02633 for the 3-bike model.

expert reply by: Mike L

0

Answer 1

We do! I recommend picking up the Tekonsha T-One #118758 for your 2019 Hyundai Ioniq Plug-In Hybrid and securing it by your hitch receiver with the mounting brackets #C42CR and #18140 so the 4-Way is easily accessible. If you have the Thule Epos bike…

view full answer...

Answer 2

Hi Prince, There is no difference whatsoever between the Replacement Glass Hatch Hooks #Y8890155 and Glass Hatch Hook Adapter for Yakima Trunk Mounted Bike Carrier #Y02612. Why Yakima has two of the same thing with different part numbers is not…

view full answer...

Answer 3

Yes we have confirmed with Yakima that the FullBack 3 bike rack part #Y02633 is a confirmed fit for your 2018 Hyundai Ioniq. I attached a picture that shows this rack installed on an Ioniq just like yours as well.

view full answer...

Answer 4

In this case, no. The Yakima #Y8890155 and Saris Hatch Huggers #SA3035 are pretty similar parts and there won't be any issues using them across manufacturers.

view full answer...

Answer 5

Either the Draw-Tite Sportframe Trailer Hitch Receiver part #24963 or the Curt Trailer Hitch Receiver part #C11486 will fit onto your 2019 Hyundai Ioniq Non Electric/plugin with no additional accessories. I recommend Draw-Tite #24963 as it not only…

view full answer...

Answer 6

I think I can help you but we don't have an install video of the Draw-Tite hitch, part #24963, being installed on to a 2019 Hyundai Ioniq. Check out the video I did link. It's for the Curt hitch, part #C11486, that fits the same model years…

view full answer...

Answer 7

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Trailer Hitch Fit for 2019 Hyundai Ioniq Plug In Hybrid

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching