Installation of Draw-Tite Trailer Hitch on 2019 Hyundai Ioniq

Question

Question:

Hello, is there an installation video for this hitch?

asked by: PAUL G

0

Expert Reply:

I think I can help you but we don't have an install video of the Draw-Tite hitch, part # 24963, being installed on to a 2019 Hyundai Ioniq.

Check out the video I did link. It's for the Curt hitch, part # C11486, that fits the same model years as the Draw-Tite and in basically the same fashion. The trimming is different between the two as are the bolt specs but the process is similar. You also need to lower the exhaust with the Draw-Tite.

expert reply by: Charles S

0

Answer 1

I checked with Yakima and confirmed the Yakima FullBack 2 Bike Rack part #Y02634 is a fit for a 2019 Hyundai Ioniq. This is an excellent option with anti-sway cradles to keep the bikes from rocking back and forth, rubber coated feet to protect the…

view full answer...

Answer 2

Yes we have confirmed with Yakima that the FullBack 3 bike rack part #Y02633 is a confirmed fit for your 2018 Hyundai Ioniq. I attached a picture that shows this rack installed on an Ioniq just like yours as well.

view full answer...

Answer 3

In this case, no. The Yakima #Y8890155 and Saris Hatch Huggers #SA3035 are pretty similar parts and there won't be any issues using them across manufacturers.

view full answer...

Answer 4

Hi Prince, There is no difference whatsoever between the Replacement Glass Hatch Hooks #Y8890155 and Glass Hatch Hook Adapter for Yakima Trunk Mounted Bike Carrier #Y02612. Why Yakima has two of the same thing with different part numbers is not…

view full answer...

Answer 5

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

view full answer...

Answer 6

Unfortunately, none of our hitch manufacturers offer a hitch that's compatible with the Hyundai Ioniq plug in hybrid. If you were needing the hitch to carry bikes, a trunk mounted bike rack like the Yakima Fullback #Y02634 2-bike or #Y02633 for…

view full answer...

Answer 7

Either the Draw-Tite Sportframe Trailer Hitch Receiver part #24963 or the Curt Trailer Hitch Receiver part #C11486 will fit onto your 2019 Hyundai Ioniq Non Electric/plugin with no additional accessories. I recommend Draw-Tite #24963 as it not only…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Installation of Draw-Tite Trailer Hitch on 2019 Hyundai Ioniq

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching