Does Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-20 Have Only Electric Lock Out

Question

Question:

I really like this coupler and will use the electric lockout but also want to use it where that is not an option. Can this coupler be locked manually as well?

asked by: Mike

0

Expert Reply:

The Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-20 only has an electric reverse lockout and does not have a manual option.

expert reply by: Jameson C

0

Answer 1

For a Four Winns Boat Trailer with Titan Aero 6000 Surge Brake Actuator, I recommend replacement using the Titan Zinc-Plated, Leverlock Brake Actuator part #099-175-20 which is ready to go as is and will be a great fit. The reason I recommend…

view full answer...

Answer 2

We do have some parts for the Dico Aero 6000 actuator on your Four Winns boat trailer: Replacement Master Cylinder - #T4395100 (you have to remove the check valve) Replacement Damper - #T4502000 Replacement Lock Spring - #T4501400 Replacement Bolt -…

view full answer...

Answer 3

There is a replacement that I recommend for the Tie Down 70E disc brake actuator, though you will want to verify that your mounting bolt holes are 3 inches apart on center and your tongue is a 3 inch channel. If they are I recommend the Dexter DX7.5…

view full answer...

Answer 4

The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-20 is a direct replacement for your Tie Down model 70E disc brake actuator with a 7000 lb capacity (Tie Down was bought out by Dexter back in 2017). Although I don't have a way of decoding your…

view full answer...

Answer 5

The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-20 is designed for disc brakes. I am assuming you have drum brakes since you got the Dexter DX7.5L A-60 Brake Actuator - Bolt On - Drum - 2" Ball - Zinc - 7,500 lbs #DX27FR. You will not be able…

view full answer...

Answer 6

If your trailer tongue is 3 inches wide and the mounting holes for your existing Tie Down actuator are 3 inches apart on center then Dexter Zinc-Plated Brake Actuator, Item #099-175-20 (replacement for Titan 60) will fit. I have linked a video review…

view full answer...

Answer 7

The leaning that is occurring in your 2016 Stryker could be a number of issues, and you asked a good question about your leaf springs. Since these do flatten out (essentially elongating) over time, that could very well be the issue, but there is no…

view full answer...

Answer 8

The 3-Leaf Double-Eye Spring #D217242 that you referenced would work perfectly for you. You are correct, springs tend to flatten out over time so that is why your old spring is slightly longer than the #D217242. We always recommend you replace leaf…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Does Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-20 Have Only Electric Lock Out

Product Page this Question was Asked From

Continue Researching