Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
If one of the brakes on your trailer is missing a wire, you will have two options. First will be to replace the magnet. This will depend on what size brakes you currently have installed, but the Replacement Magnet Kit #AKBRKR-M10, as an example, will…
view full answer...If your trailer has 7 wires running all the way back to the brakes, then yes, you can tap into the existing wiring. Each of your new brakes will have two wires for the brake magnet. One wire is for 12 volt power to the brake magnets and the other…
view full answer...The kit you are looking for is the part #BRKH10B which is nuts and lock washers needed to install the brake assemblies part #AKEBRK-35-SA that you referenced. The nut size is 7/16-20.
view full answer...That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...For your 2019 Dodge Grand Caravan what you'd first want is a 7-way trailer connector so that you can use your Curt Echo Mobile Brake Controller #C51180. For that you'd just need the part #22121 and you'd be set as this is the custom fit…
view full answer...The Tekonsha 7-way that fits your 2019 Dodge Grand Caravan #22121 comes with the missing brake controller wiring that you mentioned not finding on your 2019 Dodge Grand Caravan. So you'd wire the PowerTrac part #39523 directly to that and…
view full answer...The Demco Tabless Base Plate Kit #DM9519336 that you referenced will work perfectly with your Blue Ox Avail Tow Bar as long as you add the Demco Adapter #DM9523127. The adapter is what will allow the tabless base plates to attach to the Avail Tow…
view full answer...Hey Henry, we sell just he 4-way wiring that comes with the Roadmaster part #RM-15267 with the part #16-4B-1 which we sell by the foot. How'd yours get damaged?
view full answer...The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-20 only has an electric reverse lockout and does not have a manual option.
view full answer...For a Four Winns Boat Trailer with Titan Aero 6000 Surge Brake Actuator, I recommend replacement using the Titan Zinc-Plated, Leverlock Brake Actuator part #099-175-20 which is ready to go as is and will be a great fit. The reason I recommend…
view full answer...We do have some parts for the Dico Aero 6000 actuator on your Four Winns boat trailer: Replacement Master Cylinder - #T4395100 (you have to remove the check valve) Replacement Damper - #T4502000 Replacement Lock Spring - #T4501400 Replacement Bolt -…
view full answer...