What Cargo Carrier and Anti-Rattle Device do You Recommend for My 33.4x27.6x 28.4 Generator?
Updated 03/01/2022 | Published 02/28/2022
Products Featured in This Question
Question:
I have a 445 fifth wheel camper with a 2 trailer hitch. I am looking for a way to carry a Honda EU7000iS generator. The generator is 33.4x27.6x 28.4L x W x H and is 270lb. Do you have something you would recommend. From my research the biggest issues seems to be the hitch bouncing and the hitch breaking... Thanks
asked by: Vern V
Expert Reply:
For a generator that measures 33.4 inches long x 27.6 inches wide x 28.4 inches high and weighs 270 pounds, I recommend using the 32x48 Reese Solo Cargo Carrier for 2" Hitches - Steel # PS1040100. This cargo carrier is approved to withstand the added force/torque on the back of your fifth wheel camper. We've had many neighbors who have given this carrier rave review when used on a trailer. The inside dimensions of the Reese carrier are 47-3/4" long x 31-3/4" wide x 2-3/4" deep.
As far as theft-deterrence and keeping the carrier secure to the hitch during transport, I strongly recommend the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches # 63232 Not only does this lock protect your investment, but it also provides you with a tight fit that connects the shank of the carrier to your hitch. This pin dramatically reduces any shank movement and vibration during movement. For even more support against movement and vibration, you can also use the etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches - Vinyl Coated Steel # e99007.
To make sure that your generator sits nice and snug on the platform, I recommend using the Erickson Cam Buckle Tie-Down Straps w/ S-Hooks - 2" x 8' # EM34409. The S-hooks will attach to the tie-down openings along the wide rails of the carrier.
As with all hitch accessories, I recommend confirming with your trailer's owner's manual that you can safely transport the weight of the cargo you wish to transport.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Mount-n-Lock GennyGo Generator and Cargo Carrier for 2" Hitches - Aluminum - Stowable - 150 lbs
- Q&A: Cargo Carrier on the Rear of my 5th Wheel Camper
- Shop: Shocker Trailer Tongue Mount - Weld On Vertical Channel
- Shop: Curt Solid Steel, 2" Hitch Bar with Raw Finish - 8" Long
- Shop: Buyers Products Bolt-On 2" Hitch Receiver Tube - 20K
- Shop: Trailer Tongue Vertical Channel Weld-On Adaptor with 6 Bolt Holes - Welded
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel
- Q&A: Best Cargo Carrier for Generator on an RV
- Q&A: Can The 32x48 Reese Solo Cargo Carrier # PS1040100 Be Used Behind a 5th Wheel?
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Measure for Trailer Hitch Drop
- Video: How to Choose a Trailer Brake Controller
- Shop: Suspension Enhancement
- Search Results: trailer tires and wheels
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4
- Video: Clean Up Your Trailer Wiring
- Shop: Brake Controller
- Search Results: trailer jack
- Shop: Gooseneck Hitch
- Search Results: trailer hitch ball mount
on Hitch Cargo Carrier
