Replacement Flex Coil Adapter and Parts Needed to Use Brake Controller on the Brake Buddy Stealth

Updated 02/21/2022 | Published 02/19/2022

Products Featured in This Question

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3470)

$118.67

Question:

I need to purchase the rubber rectangle plug for my new brake buddy stealth brake system I installed on my jeep. I want to carry a spare if someone steals it at the Walmart parking lot my brakes cant be released. Let me know the part # for this plug and where I can purchase it. I dont want the complete plug and harness. I also would like to know for a Tiffin motor home 2014 freightliner XCM chassis what wire harness I will need to hookup the brake controller that came with this stealth brake buddy system.

asked by: Clifford H

Expert Reply:

From your description it sounds like you are wanting the Replacement Flex-Coil Adapter # HM39532.

To install the Brake System Controller that comes with your Stealth # HM39530, you will have to splice into your RV's wiring (there isn't currently an adapter/harness available) and connect the unit to your battery, stop light switch, and 7-way trailer connector. To do this, you will need some additional wiring and either a 20-amp circuit breaker or an in-line fuse. If you don't already have a 7-way trailer connector at the rear of your RV, you can use the Universal Installation Kit # ETBC7.

expert reply by: Scott S