Correct Hubs for Boat Trailer with L68149 and L44649 Bearings
Updated 02/16/2022 | Published 02/14/2022
Products Featured in This Question
Question:
Hello, I have to replace two hubs on my boat trailer, The kit I used to replace the bearing last spring was Bearing Kit L68149 L44649 Grease Seal 10-19 I.D. 1.719 for #84 Spindle Do you have a hub that would fit this trailer using those measurements? Id prefer one already packed with bearings and just needed to be put on the trailer. Thanks,
asked by: Keith F
Expert Reply:
The correct trailer idler hub for your boat trailer is the Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-545-35-K or part # AKIHUB-545-35-EZ-K if you have zerk fittings on the spindle. These are both pre-greased so there is no mess to be had.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Looking For Idler Hub That Fits The Same Spindle As The Dexter 08-435-05 Rotor
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Hub/Drum Solution for Trailer with 3,500 lb Axles
- Q&A: Replacement Idler Hub For Dexter 8-258 Hub To Be Used With a Boat Trailer
- Q&A: Recommended Trailer Hub with 5 Lug Bolt Pattern with Bearings L68149 and L44649
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Search Results: ez loader
- Q&A: After How Many Years Should Trailer Tires Be Replaced
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer tires and wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer wiring
- Video: How to Choose a Trailer Brake Controller
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Suspension Enhancement
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Shop: Brake Controller
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Gooseneck Hitch
- Search Results: spare tire mount
on Trailer Hubs and Drums
