Looking For Idler Hub That Fits The Same Spindle As The Dexter 08-435-05 Rotor
Updated 07/01/2026 | Published 06/26/2026
Question:
Looking for a cheap emergency spare hub the would fit same spindle as a DEXTER 008-435-03. dont need rotor version just simple hub kit. want to have in truck when towing bass boat.thanks
asked by: Randy B
Expert Reply:
Hey Randy, thanks for reaching out. We have just the thing! The Dexter 008-435-03 fits a standard 3,500 lb axle, so for an idler hub that fits the same axle, you can use the following:
- Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-35-EZ-K
This hub comes pre-greased so it'll be perfect for using in a pinch if you ever need to replace a hub on the side of the road. You get a grease cap and lug nuts too.
What kind of boat do you have? Whereabouts do you usually fish?
(click to enlarge)
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Recommended Trailer Hub with 5 Lug Bolt Pattern with Bearings L68149 and L44649
- Q&A: Hub/Drum Solution for Trailer with 3,500 lb Axles
- Q&A: Replacement Idler Hub For Dexter 8-258 Hub To Be Used With a Boat Trailer
- Q&A: Correct Hubs for Boat Trailer with L68149 and L44649 Bearings
- Article: Trailer Wiring Diagrams
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements
Goyrilla
7/1/2026
I don't have much time but I will give you a short response. The Hub Assembly that you reference are easy to install and durable. I just trailered on a 6.5 hr trip and had no problems. The Hubs performed spectacularly. I would buy again.