Replacement Spacer Blocks for Draw-Tite Max-Frame Trailer Hitch Receiver 75774

Question

Question:

Hello, how thick are the spacer plates on the draw-tite 75774 hitch? The center bolt sheared off on mine and I lost the spacer plate and need to find a replacement immediately.

asked by: Cody C

0

Expert Reply:

There are two different spacer blocks that come with the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75774, per the instructions they are 5/8” X 1-1/2” X 2” and 1/4” X 1-1/2” X 2”. That said, they do not specificy a thickness although we do offer these plates but you would have to purchase a hardware kit which has them, the Replacement Hardware Kit for Trailer Hitches part # RHK.

expert reply by: Conner L

0

Answer 1

Hey Parakesh, there aren't going to be any custom options but what you can do is use something like #41990 which has a 16k capacity. This option would require it to be welded on and would also require either the 7" drop brackets #4907 or the…

view full answer...

Answer 2

Your 2012 Express Shuttle Bus would be built on the cutaway chassis version of the 2012 Express Van so that means the correct hitch you'd need is the Buyers Products part #3371801102 which was made for this style of chassis. I attached a picture…

view full answer...

Answer 3

Ambulances are really pretty hard to fit a hitch too since the ambulance bodies all vary quite a bit and none of our hitch manufacturers have decided to come up with a fit for them. I spoke to my contacts at Curt and Reese and the only styles of…

view full answer...

Answer 4

I do have an option for you though there aren't custom fit hitches for box trucks. The frame is not really the issue but rather the body the up-fitter adds on which could hang down below the frame where the hitch mounts or actually use the holes…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Replacement Spacer Blocks for Draw-Tite Max-Frame Trailer Hitch Receiver 75774

Products Featured in This Question

Continue Researching