bing tracking image
  1. Trailer Hitch
  2. etrailer
  3. Class III
  4. 2 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
2010 Mazda 3
etrailer

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

Part Number: e98862
In Stock
$179.44
Trailer Hitch
Not Confirmed to Fit

2010 Mazda 3

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look. Great Prices for the best trailer hitch from etrailer. etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" part number e98862 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (749)
  • Q & A (0)
  • Photos

etrailer Trailer Hitch - e98862

  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • Visible Cross Tube
  • 350 lbs TW
  • etrailer
  • 5000 lbs WD GTW
  • For Towing
  • 500 lbs WD TW

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer
  • Matte black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 350 lbs
      • Maximum TW when used with weight distribution: 500 lbs
  • Limited lifetime warranty


Rugged, Matte Black Finish

The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.


Matte Carbide Finish vs Glossy Finish

Matte Carbide Finish vs Glossy Finish

etrailer Technical Support

At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



e98862 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide

Installation Details E98862 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.8

749 reviews
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.

by:

Easy to install, 25 minutes



by:

Arrived on time and complete.



by:

Excellent quality, easy to install.



by:

very nice and easy to install,customer sevice was excellent.i will recommend this to my friend...



by:

Super fast delivery! Excellent communication!! Provided instruction were simple!!! Installation took about 15 minutes ( including the wiring hook-up).



by:

nice hitch easy to put on.30 min. to in stall



by:

Excellent product and installation inst ructions.



by:

The installation took much longer then 40 minutes..



by:

Very happy with this purchase. Instructions were great and the fit and finish were perfect. Highly recommended.



by:

Fits perfect. I like that the ends are not open. Great communication from etrailer retailer.



by:

Easy to install, fit perfect. Wiring was easy too. Appreciate the online instructional videos, couldn't figure out all the written instructions...



by:

No complaints. Hitch goes on easy. The video tutorial is a great help.I decided to trim and re-install the drivers side plastic panel that has to be removed. Trimmed off about 1 inch wide by 4 inches long. Went back in very easy.



by:
2015 Honda Odyssey

This product was installation friendly for my 07 Odyssey and all I did was just bolt it on without having to move or remove anything like the video showed. It took me 15 minutes and the product was well designed to fit.



by:

You are great! Hitch arrived in perfect condition in two days. Installation simple done without help in less than 30 minutes. Instructions were clear and photos big help. Thanks!



by:

Product was as advertised. If we had know wharves were doing installation might have gotten done in the half hour they allotted.the hitch looks good and I am satisfied with everything. Delivery was fadyervthan I had epected and quality looks good too. Would gladly do business with them again.



by:

Great hitch,fits tight to bumper and looks great.Only thing I would suggest is a tap be included in hardware!! The bolt holes on my 2005,after 6 years in New England, were rusted over badly. After tapping them, the job went smooth though.Unless your van is like new or you live where it doesnt cause rust, do yourself a favor and get a 12x1.25 tap and re-tap the holes first.



by:

Product was just what I ordered. Arrived promptly. Easy to track. Came complete with the necessary hardware and instructions. There is also an instruction video online that made it even simplier. I plan to order more products from etrailer in the future.



by:

I received my items in 3 days. The customer service reps were very helpful. They even verified that the products I was ordering would indeed fit on my minivan! The items came with color photos and EASY to follow instructions for installation which were again specific to my minivan! Everything was very easy to install and I was very pleased with all aspects of the service and the products! If I ever need anything of this nature again, I will not waste time shopping anywhere else! Highly recommend this company1



by:

Hitch came as advertised. Installed it over the weekend. Directions were very clear. If the threads on my 12 year old vehicle were not rusted, I would have had it installed in 10 minutes. The wiring harness was also simple to install!



by:

The ordering process was smooth and simple. The hitch and wiring harness were shipped ahead of schedule. The packaging was adequate with no damage. The instructions that were included were easy to follow. It helped to watch the videos that were available on the website. I would recommend this company in the future.



by:

My order arrived very promptly. Hardware included a bolt that was poorly threaded which I replaced with one I purchased from the local hardware store. Installation was fairly easy, I wished I had a hoist and an extra set of hands. I do believe some of the other hitch designs are better. Had I looked closer at all of the products, I may have chosen the Hidden Hitch unit instead. However, for the bike rack use and light towing I intend to use this for, I am sure it will work just fine.



by:

The original hitch arrived packed loosely in plastic and was damaged with lots of scrapes and exposed metal. I contacted customer service and they sent a second hitch with no questions asked. The second hitch arrived well packed in a cardboard box with bracing inside. The hitch was is excellent condition.It took me a little under an hour to install the hitch myself from opening the box to putting away the tools. You can install the hitch without lowering the exhaust, but you have to be a little creative with the wrench angles. I was also able to reinstall the plastic fairing on the drivers side by trimming it back a bit to get around the hitch. There's a little reinforcing rib that is perfect to cut along.Overall I am pleased with the hitch (we'll see how it goes through a few winters though) and the ease of installation. While the condition of the first hitch was disappointing, I am happy with how the situation was handled.



by:
Honda Odyssey

I ordered the hitch receiver to attach a bike rack to our '08 Honda Odyssey. I got tired of the marks the bike tires and pedals left on the vehicle due to rubbing with our old rack.The hitch receiver was delivered very quickly and installation was simple. The installation videos posted on etrailer.com were helpful and accurate. The printed instrutions included with the product were clear and accurate to my vehicle. It took me about 35 minutes to get the hitch installed.The qaulity of the hitch receiver exceeds my current needs as I am only attaching a bike rack and not towing anything heavy, but it seems to be extremely well-constructed. The steel seems to be very heavy-duty and all of the welds look to be well-done.



by:
Volkswagen

I used this hitch as the center section for a custom triple hitch for a VW Vanagon. I needed a wide,well-made hitch where the 2" receiver was vertically centered on the crossbar and this fit the bill. Finish quality was just okay, but that did not matter for my purposes of modifying it. I later had the whole thing hot-dip galvanized



by:

Very easy to install all things considered. It only took me awhile because there was corrosion and rust inside some of the holes under the back of the van where the bolts go. If it’s clean, you should be able to use regular tools, but an impact was able to force it through. Getting the muffler off is really only the thing, I clipping one piece to gently move past it, then you’re putting a handful of bolts on. Not hard at all. I’ve been hauling wood and exercise equipment now with my Odyssey- it’s been fantastic!


25
749
Show More Reviews

See what our Experts say about this etrailer Trailer Hitch

  • Will The etrailer e98862 Hitch For 2009 Honda Odyssey Also Fit A 2012 Honda Odyssey?
    Hey Chad, yes you can! I see that you ordered the etrailer Class 3 Hitch # e98862 from us about 5 years ago. This hitch will fit the Honda Odyssey models from 1999 all the way to 2017. So, you can absolutely transfer it over to your 2012 Odyssey. You will most likely need a new hardware kit for the new vehicle. We can provide a full hardware kit with part # RHK. When you go to the page for the # RHK there will be a box where you need to enter the part number for your hitch. In this case,...
    view full answer...
  • Do you Sell Replacement Hardware for My etrailer Trailer Hitch Receiver # e98862?
    Hello Paul. Yes, we have replacement hardware kits for the trailer hitches that we offer. You will want to order the # RHK, above the add to cart button you will see a place where it says "Hitch Item Number" that is where you are going to want to put e98862 as this is the hitch that you are requesting the hardware for, then hit add to cart. If you would like help placing your order to ensure you are getting the correct hardware kit, please feel free to call our customer service at 1-800-940-8914...
    view full answer...
  • Installing Hitch on 2007 Honda Odyssey With Enlarged Hole/Missing Weld Nut
    Hi Sean; so with that larger hole I'm assuming the weld nut is also missing. What you can do is use # 80101-1 along with a spacer block # RP3022 to fill the gap just like you do for the third bolt on the driver side frame rail.
    view full answer...
  • Best Hitch Receiver w/ Ground Clearance for a 2012 Honda Odyssey
    I have a solution for you but they don't give us that information. I can tell you that the side to side bolt hole spacing of the etrailer Trailer Hitch item # e98862 is 56.13", center to center. This is the frame width measurement. The bolt holes on each mounting flange are 3.18" apart, also measured center to center. I've shown these dimensions on the photo I have linked below of the diagram I made. Additionally we had a 2012 Honda Odyssey in and we took some measurements off of it once...
    view full answer...
    Image 1 for Image 2 for
  • How To Install a 7-Way Trailer Connector On a 2016 Honda Odyssey
    I have exactly what you need to add a 7-way trailer connector to a 2016 Honda Odyssey. For this, you'll need to start with a 4-way trailer connector and I recommend the T-One Vehicle Wiring Harness part # 118521 which is plug-n-play. Then you can convert this to a 7-way using the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation part # ETBC7L. The 7-way is easy to install; just plug the two 4-ways in, ground the white wire, then run the black wire up to the battery but that's...
    view full answer...
  • Do etrailer Trailer Hitch Mounting Brackets Fit Over Existing Brackets on 2016 Honda Odyssey
    To install the etrailer Trailer Hitch # e98862 on your 2016 Honda Odyssey you will put the brackets of the hitch over the flanges you're talking about. Once you torque down the hardware the hitch will be secured to the frame of your vehicle and will "clamp" against those brackets you're asking about. Attached is an installation video where you can see this done.
    view full answer...
    Image 1 for Image 2 for
  • Comparing Trailer Hitch Options for a 2015 Honda Odyssey
    The trailer hitch which offers the most amount of ground clearance for a 2015 Honda Odyssey is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76025. That said, it does require removal of the rear bumper so if this is not something you want to do I recommend the etrailer Trailer Hitch Receiver part # e98862. There are few discernable differences between respective Curt, etrailer, and Draw-Tite options. The etrailer hitch however has more of a matte finish which blends in better.
    view full answer...
  • Recommended Trailer Hitch and Weight Distribution System for 2007 Honda Odyssey
    The etrailer Trailer Hitch Receiver part # e98862 is what I recommend for a 2007 Honda Odyssey. It offers a bolt-on fit without any drilling and it will be great for towing. It can also be used with a weight distribution system like the Blue Ox 2-Point Weight Distribution part # BLU72XR which is what I recommend. Please note, it looks like there is a lot of stuff on the frame of your Aliner so you'll need to be sure you have space at around 28" back from the center of the coupler.
    view full answer...
  • Recommendation Between the Thule Camber 4 and Yakima Ridgeback 4 Bike Carriers
    The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98862 you referenced will have the hitch pin hole recessed 4-1/2 inches from the outer bumper. This will allow for compatibility with both the Thule Camber or the Yakima Ridgeback you referenced. The biggest difference between the two bike carriers for your application is the arm spread distances. The Thule Camber # TH9056 has outside cradle to outside cradle measurement of 13 inches. The Yakima...
    view full answer...
  • Hitch with Best Ground Clearance for 2011 Honda Odyssey
    For your 2011 Honda Odyssey the best 2 inch hitch option for ground clearance is the EcoHitch part # 306-X7253 which has the hitch opening the closest to the rear bumper but also only the hitch opening hangs below the bumper so there isn't a portion of the hitch that would want to drag turning into elevation changes like your driveway. Normally hitches have a lower crosstube same height as the hitch opening which is what drags on the outside corners, but the EcoHitch does not have that...
    view full answer...
  • Recommended Trailer Hitch Receiver for 2004 Honda Odyssey With 7-Bike Bike Rack
    For a hitch with a high enough tongue weight capacity you will need the Draw-Tite Max-Frame Trailer Hitch Receiver # 75270. Although the # e98862 does have a max tongue weight of 500 lbs with weight distribution, this would require a weight distribution hitch and a trailer to install it on. The # 75270 has a maximum tongue weight of 675 lbs with or without weight distribution so it will be able to handle the bike rack and bikes without an issue. However, I recommend checking your owner's...
    view full answer...
  • What is the Size of the Mounting Bolts etrailer Trailer Hitch Receiver # e98862 for 99-17 Odyssey?
    The etrailer Trailer Hitch Receiver # e98862 attaches to a 1999 - 2017 Honda Odyssey with four M12-1.25 x 35mm bolts and one 7/16-14 x 1-1/2" carriage bolt and nut utilizing a square hole spacer. We do offer the Replacement hardware Kit # RHK if you would like to get all the replacement hardware.
    view full answer...
  • Recommended Trailer Hitch Receiver for 2016 Honda Odyssey Pulling Small Enclosed Trailer
    For your 2016 Honda Odyssey I recommended the etrailer Trailer Hitch Receiver # e98862 for using either a cargo basket or for pulling an enclosed trailer. This is a Class III 2" receiver. The receiver is capable of 350lbs of tongue weight and 3,500lbs towing. With a weight distribution hitch the receiver is capable 500lbs of tongue weight and 5,000lbs towing. Be sure not to exceed the manufactures rating for towing on your Odyssey. You should not need a brake controller if your trailer...
    view full answer...
  • Hitch and Wiring Recommendations for a 2011 Honda Odyssey
    I definitely recommend going with a 2 inch receiver, like the etrailer.com # e98862. This will have a higher towing capacity than the 1 1/4 hitches and also gives you more options for accessories like bike racks or cargo carriers. Whereas the hitch refers to the vehicle, the 2 inch coupler refers to the trailer. This is a fairly standard size coupler and will utilize a 2 inch ball like # C40004 that would be installed on a ball mount like the Curt # C93KR, which would then be installed...
    view full answer...
  • Is Fascia Trimming Required To Install Draw-Tite Hitch On 2014 Honda Odyssey
    In order to install the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76025 on a 2014 Honda Odyssey you"ll need to trim the fascia in the center to allow the receiver tube opening to pass through and above the tail pipe. The reason you must trim the portion of the fascia above the tail pipe is that the hitch will come into contact with this piece if not remove. It is possible not to remove this piece but by not doing so you"ll put stress on other parts of the bumper which can lead to...
    view full answer...
  • Replacement Hardware for Curt, Da'Lan, Draw-Tite, etrailer, Hidden Hitch or Reese Trailer Hitches
    Yes, we do sell just the hardware for Curt, Da'Lan, Draw-Tite, etrailer, Hidden Hitch or Reese trailer hitch receivers. You will want the Replacement Hardware Kit for Trailer Hitches item # RHK. This will give you all of the nuts, bolts, spacers, and even a fish wire tool if your hitch requires them for install. The bolts will be of the correct grade too so you won't have to worry about a parts failure. You will need to know your hitches part number. When you go to the Replacement Hardware...
    view full answer...
  • Ground Clearance of Trailer Hitch Options for 2014 Honda Odyssey
    For your 2014 Honda Odyssey, the etrailer # e98862 has a ground clearance of 10.75 inches. The Draw-Tite # 75270 has 10 inches clearance. The Draw-Tite # 76025 has the best ground clearance at 11 inches.
    view full answer...
  • 2009 Honda Odyssey Recommendation for Carrying 3 Bikes
    I definitely have some options for you but ultimately I recommend going with a hitch mount rack as it gives you a wider variety of bike rack options and it's much easier to load bikes at the back of your 2009 Honda Odyssey than on top of it. Since you mentioned a roof rack I'll start off with those parts. For a roof rack I recommend the Malone AirFlow2 Roof Rack # MPG216 which clamps onto the raised rails of your Odyssey and gives you 58" of crossbar space to use. For a roof bike rack...
    view full answer...
  • Draw Tite 76025 On 2015 Honda Odyssey - What Is The Distance From Hitch Pin Hole To Back Of Bumper?
    With the Draw-Tite Hitch # 76025 installed on a 2015 Honda Odyssey, the distance from the hitch pin hold to the back of the bumper will be 6-3/4". So this will not work with your bike rack. Instead I recommend going with the etrailer Class 3 Hitch # e98862. Once this is installed, the distance from the hitch pin hole to the back of the bumper will be only 4-1/2". Leaving plenty of room for your bike rack. I have linked our install video for the etrailer Class 3 Hitch # e98862 below....
    view full answer...
  • Recommended Hitch for a 2015 Honda Odyssey w/ a Vantage Mobility Northstar Package
    Hey Jimmy! It looks like the Vantage Mobility Northstar Packages don't alter the rear end of the 2015 Honda Odysseys. You will want to confirm this because all of our available hitches are set up for unaltered factory set ups. If this is the case, I recommend our etrailer Hitch item # e98862. This hitch is custom fit and bolts to your Honda with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity, and a 350 lbs maximum tongue weight. I...
    view full answer...
  • What Vehicles Does The etrailer Trailer Hitch Receiver # e98862 Fit
    The etrailer 2-inch Class I trailer hitch # e98862 fits 1999 through 2017 model years of the Honda Odyssey. It does not fit any other vehicles. The hitch comes new with installation hardware but if it is being moved from one vehicle to another you will need to use replacement hardware kit # RHK. Hitch hardware cannot be re-used. Just enter part # RHK into our search box and then enter the hitch part number # e98862 and select etrailer from the drop-down menu bar. Written hitch installation...
    view full answer...
  • What is Needed to Add Trailer Hitch to 2009 Honda Odyssey
    If you only want to add a trailer hitch to your 2009 Honda Odyssey for something like a bike rack or cargo carrier all you need is the hitch itself, the etrailer Trailer Hitch Receiver # e98862. But if you wanted to use it for towing a trailer, you would also need to add wiring, the T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56161.
    view full answer...
  • Could Thule T2 Pro XTR Bike Rack Fit 2012 Honda Odyssey
    The Thule T2 Classic rack for 4 bikes part # TH69TX would fit your 2012 Honda Odyssey as long as you had a 2 inch hitch installed like the # e98862 and also would allow you at least partial access to your rear hatch and probably full access to your rear hatch. I attached two videos with hatches similar to your Odyssey to check out to see how the clearance works when the rack is tilted.
    view full answer...
  • Can I Haul a Power Wheel Chair On a Cargo Carrier While Trailer Towing With a 2014 Honda Odyssey?
    By using the Malone 2" Dual Purpose Hitch Receiver # MPG544 this will reduce your receiver capacity by 50%. To determine your exact capacity you will need to find the capacity rating on your receiver. Honda may be giving you the maximum capacity your 2014 Odyssey is capable of supporting on a receiver. We have the etrailer Receiver # e98862 with a tongue weight rating of 350lbs. As the Dual Hitch # MPG544 will reduce either 50% that will leave you 175lbs total tongue weight. The only way...
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Schuyler H
Video by:
Schuyler H
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Chris R
Video Edited:
Chris R
Employee Randy B
Test Fit:
Randy B
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Written by:
Kristina F

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<