bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class III
  5. 3500 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
1998 Chevrolet Venture
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C13068
In Stock
$210.93
Retail:$334.95
You Save: $124.02
Trailer Hitch
Not Confirmed to Fit

1998 Chevrolet Venture

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13068 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (502)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13068

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Standard 2" Receiver: Works with ball mounts, bike racks, and cargo carriers
  • Tows up to 3,500 lbs (GTW): Handles small campers, boats, and utility trailers
  • Holds up to 350 lbs (TW): Supports typical Class III accessories and cargo loads
  • Bolt-On Design: Installs with included hardware—no drilling or welding needed
  • Gloss Black Powder Coat: Protective base coat resists rust and corrosion over time
Made in USA

Features to know about

Haul Gear and Bikes with Confidence: 2" Class III Receiver for Everyday Use

This hitch gives you a 2" x 2" receiver opening and a Class III rating that’s right at home with bike racks, cargo carriers, or small trailers. With a maximum gross trailer weight of 3,500 lbs and a 350-lb tongue weight (5,000 lbs GTW and 500 lbs TW when used with weight distribution), it’s built for light towing and hauling without being overkill. The cross tube sits close for good ground clearance, making it easier to clear driveways when you’ve got a rack loaded up.

Simplify the Install: Bolt-On Design with No Welding Required

You don’t need a lift or special tools to mount this one. The hitch bolts directly to the frame using the included hardware kit, so there’s no drilling or welding involved. The precision robotic welding ensures everything lines up correctly, which means you can get it installed in a driveway or garage with just basic tools.

Stay Solid Through Every Mile: Fully Welded Steel with Rust-Resistant Finish

The hitch is built from fully welded steel and finished in a gloss black powder coat over a protective base layer to fight off corrosion. That powder coat isn’t just for looks—it keeps the metal protected from moisture and road salt over time. The design is sturdy and reliable, giving you the strength needed for hauling bikes, boats, or small trailers on regular trips.

Ready for Whatever You’re Towing: Works with Standard Accessories

Since the receiver is a standard 2" size, most ball mounts, bike racks, and cargo trays fit without adapters. Whether you’re carrying bikes out to the trailhead or pulling a small camper for the weekend, this hitch gives you flexibility for all kinds of setups. Ball mount, pin, and clip are sold separately so you can choose exactly what fits your tow setup.

Specs

Dimensions

  • Receiver opening: 2" x 2"

Weight and Capacity

  • Rating: Class III
  • Maximum gross trailer weight: 3,500 lbs
  • Maximum GTW when used with weight distribution: 5,000 lbs
  • Maximum tongue weight: 350 lbs
  • Maximum TW when used with weight distribution: 500 lbs

Warranty

  • Limited lifetime warranty

13068 Curt Class 3 Trailer Hitch Receiver

Installation Details C13068 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:

Ratings & Reviews

4.8

502 reviews
Review sort icon
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Easily installed, even while being in a hurry. The hitch met my needs and doesn't ride low. Attaching a picture of the hitch with a bicycle rack already installed.



by:

Went on fairly easy. I had to do a loaner torque wrench from our local auto parts store. Which they return the deposit when you bring it back. I also did have a little help from my 9 year old son. Total time to install took about 1 hour for me. I decided to trim the back fascia panel and put it back on so that took up about 20 minites of that time. One reason I chose this model from Curt was the ground clearance. We are planning a trip to Florida later this year and didn't want to take our Suburban. We already had a cargo rack and cargo bag, so this will work great for our luggage.



by:

The hitch arrived without issue. The box had no damage or any look of being mishandled. Installed the hitch with reletive ease although a second hand could have been used in certain instances. I chose not to mess with moving the exhaust. We are excited to utillize the hitch when we embark on our annual camping trip!



by:

I got the c 13068 trailer from e trailer for my 2014 Honda Odyssey after checking around Online and pleasantly surprised with the order, shipping, and product.

I wasn’t sure how long it would take (Due to covid) but the trailer came in a timely manner. I was able to install it myself in about 2-hours but would have taken less than 1 hour if I had all the right tools.

Since I installed it myself, I actually didn’t lift the car or removed the exhaust. Here is my experience and suggestion

1. Get the tools a head of time. Autozone let’s you loan a torque wrench and other tools if you need it. The torque wrench isn’t common so I’d get one on loan there.
2. The 11/16 and 19 mm sockets aren’t common so look for those before you start.
3. If you don’t plan to remove the exhaust, work on the car when it’s cold. I drove it to a friends to finish and the exhaust was somewhat hot.
4. Having a second person is helpful but not necessary.

Overall, I think it’s fine. I could do a follow up review but we are mainly using it for bikes and luggage. Should do the trick and really useful.



by:

I'm very please with the purchase. The web site is great with all the info you need. The installation videos are super. I did the installation myself with no problem. The only discrepancy was the size of the bolts in the instruction where different, but it fit perfectly. I called to double check the Torque spec. and customer service answer the question. The shipping was very fast as well.



by:

It was fast and easy to find what I wanted for my van and fast shipping



by:

Very solid hitch for my 2006 Honda Odyssey. About as hidden as I could hope for as the van has no space to tuck one out of sight with the tub for the folding rear seat right behind the bumper. Receiver sits about an inch further under the car than the bumper, so I have never banged my shin on it. Easy install.



by:

This 2" hitch works great on our current model (2015) Honda Odyssey - we use it mainly for a Yakima Ridgeback 4-bike rack.

This is our 2nd rack from etrailer.com - great delivery and wonderful customer service.



by:

Fast delivery and secured package (no dents or scratches), easy to install (just watch the video link that the etrailer had provided), I need to to use Tap 12mm x 1.25 to remove the rust from my van especially the passenger side (I took my time on this and make sure I don’t strip the tread). I did use another person just to left the hitch and then jack it up to hold. I’m pretty satisfied the outcome and thank you etrailer for the good communication throughout the entire process. I highly recommend this Curt Trailer Hitch, this is for my 2016 Honda Odyssey.



by:

Installed on 2015 Honda Odyssey. Normally a two man job, but used a 6" X6" an a 4" X 6" to brace center (see pics) which allowed me to do it by my self. No jack or lift required, plenty of room under van. Hardest part was getting the 10mm bolt reinstalled for the dust cover.

Instruction sheets and etrailer installation video are great help. Review before you start.

Mostly this will be utilized for a handi-cap cart lift.



by:

Product is very nicely painted and arrived well packed. The video directions provided by etrailer were fantastic. I didn’t even have to jack the vehicle up.

At this point, summer 2020 on a 2014 Odyssey, you’re probably going to want to buy a tap for the captive nuts on your vehicle. WD40 and a brush were not sufficient to clean out the nuts. The ones on the exhaust side are open to the elements. Buy a M12 x 1.25mm tap and handle. I had to use a 6” extension from a socket set to clear the exhaust. After tapping the hitch went in no problem. Personally I don’t know why you’d buy a more expensive “hidden” hitch as this one is pretty nicely tucked up there. *Careful when buying things like bike racks though. The receiver is quite a ways from the end of the bumper.

The driver’s side plastic guard will need some slight trimming to get it to fit back in place. I used a rotary tool and zipped off a bit of plastic. Pretty simple.

*Note: As of this review I haven’t actually used the hitch yet.



by:

This is not the first nor will it be the last hitch I have purchased from etrailer. if this one performs like the previous ones then it is a durable solid hitch which hauls dirt bikes, kayaks, dirt, rocks, mulch & sand on short and long hauls without problems. If that isn't enough reason to get an etrailer hitch then they really look good, well secured & tucked away under both of our Honda Odyssey's. Easy to understand install instructions & neat little tools to make life better during the installation plus the online video if one needs them. All of the above and FAST shipping!



by:

So, i've been looking for a hitch for my 2010 Honda Odyssey EX-L van to use for transporting bikes with a bike rack I just purchased. Went to trailer rental place and they were just charging too much for the hitch and installation. Since I purchased my bike tray rack for my roof rack on my sedan here on etrailer, I decided to see what hitches were offered. I went with the Curt Class 3 hitch for my vehicle after reading the reviews and watching the video that etrailer provided for instructions.

I received the package through UPS. Unfortunately, there was a hole where the hitch made its way through during the shipping process. No biggie I said. Cleaned out the mount points on the van with WD-40 and a tube bristled brush. Tested all mounted points with the provided screws and everything looked to be dialed.....Until I tried mounting the hitch. Screwed in one bolt on the driver side and tried to mount the other bolt on the passenger side to no avail. The hitch was off by just a tad under .25mm. The hitch wouldn't line up no matter what I did. So, i took a clothe (to protect the nice finish) and my rubber mallet and hammered it out. It just took a few good hits to make up for the difference to line up the hitch. I'm thinking that it probably got out of line during the shipping process via UPS. Maybe thick pieces of styrofoam would've helped on both ends to prevent this from happening.

Anyways, I mounted the hitch, torque the bolts to specs, and everything lined up perfectly. The hitch install was very easy and probably a 20 minute job with one person only. I really like the finish of the Curt hitch and the way it's constructed. It's very solid with a 2 bike rack carrier. I rated this to be four stars just because I had to hammer out the difference to make the hitch line up. Again, it's probably the shipping process via UPS. But then again, I believe if it was packaged and protected with the styrofoam pieces on the corners, the hitch wouldn't of become misaligned during the process. I read all the reviews and it looks like one other customer had the same issue.

Thank you so much for the hitch etrailer. Here are pics that I took this morning mounted and cleaned of 2010 Honda Odyssey EXL.



by:

Item arrived without any damage. I had to call customer service about a question on bolt size and I was given an answer immediately. NO AI! I loved it. Thanks everyone for your service.



by:

Greetings
As advertised
(1) Clear
orders instructions on your site.
(2) Received my hitch in 6-7 days as promised
(3) clear instructions indicating roughly 30 minutes to install
(4) installed no problem
(5) Class III 2" good to go
Thanks to your staff
Have a good day.

Jay D. profile picture

Jay D.

6/13/2017

Great



by:

We are really pleased with this hitch. It was easy to install and looks great on the Odyssey. The most difficult part of installation was scrubbing out the mounting holes on the van. We ended up using some wire brushes from a gun cleaning kit. Just takes a little elbow grease (why they don't put plastic plugs in while being manufactured is beyond me-it can't save that much money).



by:

We bought a new (to us) Odyssey. Our last Odyssey gave us a great 11-12 years, and the hitch made family vacations all the more possible. I don't do my own car repairs, don't change my oil and don't didn't install the first hitch on our former car, but I wasn't that impressed with the hitch from the Orange moving/rental/storage company that sold and installed my first hitch. Someone recommended I check out etrailer.com. After reviewing a couple hitches, I chose this Curt Class III. The guys as etrailer rated the install as "easy" and gave both "pro install" and "DIY install" times. I found them helpful and accurate.
Prompt shipping. Excellent customer service. The included instructions and video were easy to understand.



by:

Hitch arrived on time. Installation by Sube Shop was easy and not expensive. Hitch looks great & I won't bang my legs on it putting putting items into and taking them out of the van.

Mike M. profile picture

Mike M.

12/29/2018

Im very happy with the trailer hitch and just used it 2 days ago with my bicycle rack.



by:

Already installed. Very heavy duty.



by:

Really easy to install. Instructions clear and easy to follow.



by:

Hitch fits like a glove, bike rack fits perfect and the rear door clears the
bike rack when it is tilted. I'm 75 and it took me, myself, and I 30 minutes
to complete the install.

I was NOT happy in the least with the UPS delivery service. I've lived at my address
for almost 25 years and get 2 - 3 UPS deliveries a month. The driver supposedly
tried to deliver the hitch 3 times but claimed my address was not good. I drove over to the UPS "Customer Service Center" earlier today and picked up the hitch.

UPS had beaten the package up but everything was still inside and in reasonable shape, couple minor scratches. I did some touch up before installing.

I'm not alone! When one googles the Forest Park GA UPS "Customer Service Center", a complete misnomer, ratings, its average rating is 2.5 Stars and if you read all of the 151 comments if most had a choice below a one they'd given it to the UPS Service Center. I give the Center NEGATIVE 5 Stars and the driver a NEGATIVE 10 stars.

Preston C. profile picture

Preston C.

8/21/2018

Trailer hitch has worked fine.



by:

First of all The staff at etrailer were great at resolving a problem I had.
The hitch looks great on my 2016 Odyssey. The bolt holes didn't line up perfectly (probably got dropped on the end of the box by the shipper). I just laid it down on the garage floor and whacked each end once or twice with a sledge hammer. The bolt holes now lined up perfectly. Fishing the third bolt on the drivers side went smoothly.
All in all I'm extremely satisfied with the hitch and the people at etrailer. I highly recommend etrailer for all your trailering needs!

Joel profile picture

Joel

4/21/2019

It has worked great. I only use it for a larger bike rack but Im sure it would be just fine if I were to tow anything. Thanks again!!



by:

Curt hitch C13068 and cover I-728 installed on an Oddy 2012 for the purpose of installing a YAKIMA bike rack. Due to the combination of OEM price and the need for large cutouts in the bodywork required I decided on CURT aftermarket vs. OEM. Selected CURT based on ground/receiver ground-clearance, looks and no mods to bumper bodywork. I installed the CURT hitch by myself in about 1 hour, I used a furniture dolly to move the hitch into position and cribbed it with wood to get to the right height. I did not undo the exhaust mount. Some people have expressed concern over the hitch design, at the end of the day in this "product liability environment" I assume CURT is doing their homework and properlly designed the hitch. Mind you, I do not expect to connect anything heavier than a loaded Yakima 4 bike rack (less than 250 lbs loaded).
I do not think I can add to the wealth of information provided by etrailer and the CURT instructions themselves, other than I disagree with the comment to not install the driver side plastic cover. I re-installed by trimming with a box cutter a approx. 1/2 in. × 4 in. corner section.
With regards to e-trailer. They could do a slightlly better job packing the hitch so that they do not break through the box (mine showed up sticking out with some minor scuffs). Mind you, I would buy from them again tomorrow based on all the product info, videos and reviews (good and bad), THANK YOU and Kudos
I deduct the CURT hitch 1 notch, for not extending the wings to capture all three (3) OEM mount points.
Other notes: I separatelly installed an OEM tranny cooler as recommended by HONDA.

Dexter profile picture

Dexter

8/28/2013

Good evening!Great job in placing back the driver side plastic cover. I have a question on photo no.1, whats the extension above the hitch

Patrick B. profile picture

Patrick B.

8/29/2013

That is actually a hitch cover that he wedged up above the hitch to get it out of the way. If you look closely, you can see it has a tether that goes around the hitch behind the collar at the moth of the hitch. It is part I-728.
Paul profile picture

Paul

12/23/2013

Hi Francisco, Thanks for the great review. It helped us to clear any doubts and decide on the hitch. One humble request...could you please post the picture for where you replaced the driver side plastic cover? Im curious to see how to cut out in order to replace it. Many Thanks!

Francisco profile picture

Francisco

12/30/2013

You just need to cut on one corner of the inside lip of cover, you are cutting the tip of this lip. Take your time, place the cover and cut away the interference little-by-little. I placed and removed three times because I wanted a tight fit and did not wanted to cut more material than required. Attached find two images indicating the location where I had to cut on the inside lip of the cover. I used a box cutter and shaved little by little, you could also use a hot knife or a rotary tool just dont overcut. Take your time.

Patrick B. profile picture

Patrick B.

12/30/2013

Thanks for the follow up, I added the two new photos to the original review.


by:

Package came a little out of the box but the contents were in good shape and everything looks great. Going to install on a 2006 Honda Odyssey. It should go well.

James D. profile picture
Etrailer Expert

James D.

6/12/2026

Thanks for the review, Gus! We're glad everything arrived in good shape despite the package taking a little abuse in transit. Good luck with the installation on your 2006 Honda Odyssey. We have install videos for reference if you need visiuals. Thanks for choosing etrailer!



by:

It was a fast delivery! There was damage to one end of the box. (UPS) Upon opening I found no damage to the hitch. The parts were secured very well to the center of the hitch. Had it installed by an auto shop onto my 2015 Honda. They said it was very easy. I'm using it for a bike rack.


25
25

See what our Experts say about this CURT Trailer Hitch

  • Will The Curt T-Connector C56378 Work On A 2015 Honda Odyssey With Backup Sensors?
    Hey Robert, thanks for reaching out. The Curt T-Connector Vehicle Wiring Harness # C56378 will work on the 2015 Honda Odyssey with backup sensors. That video you saw is an older video and at the time it was made, the harness did not have compatibility with the backup sensor. Curt has since added an additional connection to the harness that allows it to work with the backup camera/sensor. So you will be just fine to use it on your Odyssey. So get that harness, plus the Curt # C13068 hitch...
    view full answer...
  • Comparing Curt and Draw-Tite Trailer Hitches for a 2015 Honda Odyssey
    Curt decided not to design hitch # C13068 to account for those welded on pieces you referenced in order to maximize the size of the side hitch brackets. As to why they chose to go with a 5 bolt design I can't say. The Draw-Tite hitch # 75270 sounds like it is what you would like more since it accounts for those welded on pieces and attaches in 6 places. If it were me I would go with Draw-Tite hitch # 76025 for the 2015 Honda Odyssey because with it only the receiver is visible. Installation...
    view full answer...
  • Hitch Mounted Bike Rack Options for 2004 Honda Odyssey
    For carrying 4 bikes, you will need a hitch mounted bike rack which would require the installation of a hitch on your 2004 Odyssey. I would recommend the Curt Class III receiver, part # C13068. The Curt hitch is the most affordable alternative, but it has the same weight capacity and quality as the other choices. You can choose between a hanging-style rack or a platform rack. A platform rack like part # S64665 carries the bikes on hoops or trays that the bike tires sit in. A ratcheting...
    view full answer...
  • Weight Distribution System for 2003 Honda Odyssey Recommendation
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. The max tongue weight rating for...
    view full answer...
  • Weight Distribution System with Sway Control Recommendation for 2,200 Camper Trailer
    For a weight distribution system that will work with your Curt hitch part # C13068 that you have installed on your 2007 Honda Odyssey I would recommend the Reese Strait-Line part # RP66082 as it has a tongue weight range of 200-600 lbs which will work well with the weight of your trailer and features the best sway control on the market that works to fight sway before it starts. What's also nice about this system is that it uses trunnion style spring bars which will help with ground clearance...
    view full answer...
  • Are CURT Trailer Hitches Compatible with Pro Series Weight Distribution Systems
    A CURT Trailer Hitch, like # C13068, is compatible with weight distribution systems made by Reese. On any hitch, you would check the installation instructions to determine if the hitch is rated for use with weight distribution. You will also want to check the vehicle owners manual to determine if the vehicle manufacturer allows the use of weight distribution. To determine the correct weight distribution system for you, you will want a system that has a tongue weigh capacity range that...
    view full answer...
  • Broken Weld Nuts When Installing Curt C13068 Hitch On 2021 Honda Odyssey
    Hello Josh, thanks for reaching out. Sorry to hear the weld nuts broke, that is never fun. The Curt # C13068 hitch for the 2021 Honda uses 7/16" grade 8 bolts. The spacer should be a 1/4" x 7/8" x 2-1/4" square-hole spacer. The spacers and bolts are not something we carry individually unfortunately. You should be able to find the bolts and nuts at a local hardware store, just make sure they are grade 8. The spacer might be a bit more tricky to find, but I have seen them at big hardware...
    view full answer...
  • Comparing Curt C13068 And etrailer e98862 Hitches For The 2016 Honda Odyssey
    Hello Bob, thanks for reaching out. Both the Curt # C13068 and our etrailer # e98862 hitch are both confirmed top fit the 2018 Honda Odyssey. You must have a good eye, because the paint finish is the main difference between the two hitches. Our etrailer brand hitch is made by Curt, so structurally they are identical. Our etrailer hitch uses a matte black powder coating, while the Curt hitches use a gloss black finish. We have found that the matte black powder coating is better at resisting...
    view full answer...
  • Will The Trailer Hitch From A 2010 Honda Odyssey Fit A 2016 Chrysler Town And Country
    Hey Laura, The Curt Trailer Hitch Receiver # C13068 you bought for your 2010 Honda Odyssey is unfortunately is not a fit for a 2016 Chrysler Town And Country so you would need to go with the etrailer Trailer Hitch Receiver # e98854 instead. If you plan on adding lights to a bike rack or cargo carrier or want to tow a trailer then you'll also want to pick up the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118534 as well.
    view full answer...
  • Replacement Hardware for 2010 Honda Odyssey Curt Trailer Hitch
    Hey Steve, thanks for reaching out! We do have replacement hardware for the Curt Trailer Hitch # C13068 that fits your 2010 Honda Odyssey; this would be the Kit # RHK. Just go to that product page and type in the trailer hitch part number so our team know what hardware to pull for you! If you let me know the year of your newer Odyssey I can double check out records to make sure this hitch is designed for the vehicle or not.
    view full answer...
  • Availability of Hitch Install Hardware for Curt C13068
    Hey Joey, yes we do sell replacement hardware for the Curt hitch part # C13068 with the part # RHK. With this kit you'd get all of the components needed. Are you moving the hitch to a new vehicle?
    view full answer...
  • Replacement Hitch Hardware for Curt Hitch 13068 On Honda Odyssey
    Yes, we do offer replacement hardware for the Curt Trailer Hitch Receiver part # C13068 which is a fit for a 1999 - 2017 Honda Odyssey, you'd simply need to order the Replacement Hitch Hardware Kit part # RHK.
    view full answer...
  • Solution for Broken Weldnut During Hitch Install
    Broken weldnuts can be rather annoying when trying to install a hitch. It's a fairly common problem that we see and because of that we made an FAQ video on how to address this problem. Check out the video I attached to see it. You will need a bolt leader like part # 80101-1 as well.
    view full answer...
  • Replacement Hardware For Curt Trailer Hitch Receiver # C13068
    We do have trailer hitch hardware for your Curt # C13068 trailer hitch receiver. The Replacement Hardware Kit for Trailer Hitches # RHK is what you need. You will need to enter the hitch item number you listed and then select Curt from the manufacturer drop box. We will create a kit for you of all the hardware needed. I've attached a video of the installation to further assist.
    view full answer...
  • Replacement Hardware Kit For A Curt # 13068 Trailer Hitch For A 2003 Honda Odyssey
    The Replacement Hardware Kit # RHK will give you the replacement hardware needed to install your Curt Hitch on your 2003 Honda Odyssey. When you get to the # RHK web page there will be two boxes you will have to fill out. The first box you ask you what the hitch item number is type in C13068. The second box will ask for the manufacturer it is a drop down menu select Curt then place your order and it is all good to go. I attached a review video link below.
    view full answer...
  • Fixing Broken Weld Nuts on 2006 Honda Odyssey Installing a CURT Class III Trailer Hitch Receiver
    The weld nuts were probably still dirty, when you were installing the hitch which caused the weld nut to brake off when putting torque on it. If you have not already installed the other bolts, you will want to clean them out with WD-40 and wire brush (see video link). What you will want to do is take some vice grips to hold the head of the bolt in place, then take an angle grinder with a cut off wheel or a reciprocating saw to cut the bolt. Then, using an access hole towards the front...
    view full answer...
  • Cleaning Rusty Bolt Holes to Install Curt Trailer Hitch Receiver # C13068 on 2002 Honda Odyssey
    I want to start by thanking you again for your recent order. We appreciate your business. When it comes to installing the Curt Trailer Hitch Receiver, # C13068, on your 2002 Honda Odyssey, it is best to just clean out the bolt holes on your frame instead of using a tap. You will want to start by soaking the bolt holes on your frame with a penetrating lubricant like WD-40. Let the lubricant soak in and then use a wire brush, like part # 814092, to scrub out the holes and free the opening...
    view full answer...
  • What Wiring Harness and Brake Controller do You Recommend for My 2014 Honda Odyssey?
    For wiring to add a brake controller to your tear trailer when towing with your 2014 Honda Odyssey, the vehicle must first have a 4-way wiring harness. If you need a 4-way, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118521. This harness comes with a better converter box than the Curt # C56378 or the Hopkins # HM11143114. Once the 4-way is installed, you are ready for the 7-way. For that harness, I recommend the Universal Installation Kit for Trailer...
    view full answer...
  • Replacement Hardware Kit For Curt Trailer Hitch Receiver # C13068
    We currently only carry the square hole spacer and M12 bolt as part of the Replacement Hardware Kit # RHK. You will need to ensure you put the Curt Trailer Hitch Receiver number 13068 in the appropriate box when placing the order.
    view full answer...
  • Will Weight Distribution System Allow Honda Odyssey with Class III Hitch to Tow Camper
    You are correct that the weight of equipment loaded behind the tow vehicle's rear axle must be added to the tongue weight. The tongue weight is usually 10%-15% of the loaded trailer weight, plus the weight of this additional equipment. If we go with the upper end of this range and assume that your trailer will be loaded to its full capacity, 3,015 lbs, this gives us a tongue weight of 452 lbs. Without knowing the exact capacity of your hitch, it's difficult to say whether this will present...
    view full answer...
  • Replacement Hardware for Curt 13068 on 2004 Honda Odyssey
    We do have the replacement hardware for the Curt # C13068. What you need is the Replacement Hardware Kit for Trailer Hitches # RHK. This kit comes with everything you need to install the hitch on your 2004 Honda Odyssey. The price can be found on the product page. I included an installation video below for your reference.
    view full answer...
  • Broken Weldnut When Installing Trailer Hitch on 2014 Honda Odyssey
    A broken weldnut installing Curt Trailer Hitch # C13068 is problematic but there is a solution to this so you can finish up the install on your 2014 Honda Odyssey. Like you said you will use another spacer and carriage bolt which you will need to fishwire through the frame with Wire Bolt Leader - 1/2" # C58400. We made a video outlining what you can do as well, which I linked for you below and highly recommend checking out.
    view full answer...
  • Replacement Hardware for Curt Trailer Hitch 12031 or 13068 on 2009 and 2002 Honda Odyssey
    We do have the full replacement hardware you need for a Curt trailer hitch receiver that fits a 2002 and 2009 Honda Odyssey, but it depends on the hitch you have as opposed to a bolt size. You will also not be able to re-use any hardware that came with the hitch; it is a one-time use only and trying to re-use can lead to failure of the hitch and is really unsafe. So for replacement hardware you will need the Replacement Hardware Kit for Trailer Hitches # RHK. This will work with either...
    view full answer...
  • Comparing Curt Hitch Receiver #13068 vs. #13370 for 2019 Honda Odyssey
    For your 2019 Honda Odyssey Touring, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13370 is the correct fit. The # C13068 is not a fit as there is a change in the frame in 2018 so that hitch only fits 1999 - 2017 Honda Odyssey models. To go with hitch # C13370, you will want the T-One Vehicle Wiring Harness with Upgraded Circuit Protected ModuLite HD Module - 4-Way Flat # 118781. Then for a ball mount I recommend the Curt Towing Starter Kit for 2" Hitches - 2" Ball...
    view full answer...


< Previous
123. . .5



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Joe B
Test Fit:
Joe B
Employee Brent H
Test Fit:
Brent H
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Zach D
Video Edited:
Zach D
Employee Andrew K
Video by:
Andrew K
Employee Alan C
Video by:
Alan C
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Michael B
Updated by:
Michael B
Employee Isabelle B
Updated by:
Isabelle B
Employee Eric H
Updated by:
Eric H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924