Universal Installation Kit for Adding a 7-Way Connector to a 2022 Honda Odyssey

Question

Question:

I have a 2022 Honda Odyssey and I am wanting to convert my 4-way wiring harness to a 7-way so I can control my trailer's brakes with my Echo Brake Controller.

asked by: Bill G

0

Expert Reply:

To use your Curt Echo Wireless Trailer Brake Controller item # C51180 with your 2022 Honda Odyssey you will need the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires item # ETBC7L. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your Honda with an included bracket. This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it allowing you to run the Curt Echo. The universal installation kit allows you to use a trailer brake controller, like the Curt Echo, that pulls power from your trailer connector instead of wiring into your vehicle. This makes installing this connector easy compared to one that draws power from the vehicle. I have linked an installation video.

expert reply by: Jerred H

0

Answer 1

I do agree that the Tekonsha Wiring harnesses are the way to go. They tend to be the longest lived of the harnesses we offer, but the #118753 and #118781 for your 2022 Honda Odyssey definitely make it a little confusing. However, I am here to…

view full answer...

Answer 2

Hey Matthew, the first thing you need to add a 7-way to your 2022 Honda Odyssey is a 4-way since there isn't a direct fitting 7-way available for your vehicle. So for a 4-way you would want the Tekonsha part #118781 which is very easy to install…

view full answer...

Answer 3

The first thing you will need for wiring your 2018 Honda Odyssey EX-L is the 4-pole harness. I recommend the Curt T-Connector, part #C56382. It has a relatively easy installation: just remove a few pieces of the rear trim panel and plug into the…

view full answer...

Answer 4

For your 2019 Honday Odyssey you can get the factory wiring harness for the 4-way or you can use the T-One Vehicle Wiring Harness with Upgraded Circuit Protected ModuLite HD Module - 4-Way Flat #118781 which installs behind the driver's side trim…

view full answer...

Answer 5

To convert the 4-way of your 2018 Honda Odyssey to a 7-way so that you can use your Curt Echo part #C51180 what you would need is the part #ETBC7L which we put together specifically for this situation. Your 4-way plugs into it and once you run the…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

To install a brake controller on your 2022 Honda Odyssey, you'll need to begin with a functional 4 pole trailer wiring harness. To determine which one you need, you'll need to look in the fuse panel located in the driver's side bulkhead…

view full answer...

Answer 8

As long as your 2020 Honda Odyssey doesn't fall into the extremely rare category of Odysseys that are missing terminals on fuse locations #10, #11 and #12 inside the fuse box, your best option is to go with the Tekonsha #118781. Curt offers a…

view full answer...

Answer 9

Thank you for all of the information. I am more than happy to help you sift through the selection of brake controllers so you can choose the best one to use with your 2020 Honda Odyssey. Since you only stated as having the Draw-Tite Trailer Hitch…

view full answer...

Answer 10

Congratulations on getting your first travel trailer! The brake controller I recommend for your 2019 Honda Odyssey is the Curt Echo Wireless #C51180 due to it being very easy to install, and it not requiring you to run any wires or drill any holes…

view full answer...

Answer 11

With your 2018 Honda Odyssey already having a 4-pin flat connector you will need the 7-Way Kit #ETBC7. This will allow you to connect to your 4-way flat and provides the additional wiring for a charge line and brake controller. For a brake controller…

view full answer...

Answer 12

I have a really easy option for installing a 7-way and brake controller on your 2019 Honda Odyssey but you do need to first start with a 4-way like you mentioned. For that you'd want the part #118781 which is super easy to install and comes with…

view full answer...

Universal Installation Kit for Adding a 7-Way Connector to a 2022 Honda Odyssey

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching