What 7-Way and Brake Controller do You Recommend for My 2022 Honda Passport?

Question

Question:

what 7-way and brake controller do you recommend for my 2022 Honda Passport? Have a hitch installed and am looking to add a controller for my factory tow package.

asked by: Alexander

0

Expert Reply:

For your 2022 Honda Passport's 7-way wiring, you need the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # 118286 The T-One includes a ModuLite power converter to ensure that your vehicle's wiring matches that of your trailer. Also, this converter is better quality than the competitor Curt # CU86FR.

For the brake controller itself, I recommend the Curt Echo # C51180. The Curt Echo allows you to control the settings of your controller with the ease of your Smart device. Also, the installation of the Echo is quick and easy due to the elimination of dealing with lot of additional bulky wiring that comes with most other controllers.

If you need help with either of these parts, I linked installation videos to guide you through the process.

expert reply by: Bob C

0

Answer 1

Thanks for the picture! Redarc does not have a specially designed mounting panel for Honda Pilots. I checked their website and they recommend the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item #331-TPSI-001.…

view full answer...

Answer 2

We can definitely get you set up. For a 7-way wiring harness for your 2024 Honda Pilot trailsport I recommend the Curt T-Connector #C35ZV which will plug in to the existing tow package connector at the rear your vehicle. I do also recommend getting…

view full answer...

Answer 3

I have attached a basic brake controller wiring diagram for you. You will want to make sure that you ground the white wire to the negative post on the battery. The black wire will attach to the positive battery post. The red wire will tap into the…

view full answer...

Answer 4

Hey Tom, thanks for reaching out! Here are the parts I recommend for your 2020 Honda CR-V: - etrailer Trailer Hitch Receiver #e98848 - T-One Vehicle Wiring Harness #118741 - Universal Wiring Harness #ETBC7 - Mounting Bracket #18136 - Tekonsha Voyager…

view full answer...

Answer 5

It sounds like you are definitely on the right track here. You would plug the Adapter #C57672 into the existing 4 flat plug. Then the Kit #C51500 contains the rest of the wires you will need to run to upgrade to a 7 way. From there you will be ready…

view full answer...

Answer 6

Hey Clay, to install a Tekonsha Voyager Id in your 2020 GMC Yukon you would need the part #TK26BR for the brake controller and then the part #3016 for the install harness and you'd be set. What will you be towing?

view full answer...

Answer 7

Hello Lewis, I can definitely get you set up with the correct towing components to get you out on the road to adventure! You’ll want to check your owner’s manual to see what Honda says you can tow, just because the hitches are rated that high doesn’t…

view full answer...

Answer 8

I would be happy to help you and make a recommendation based on fitment. First of all you won't have to drill into anything to mount your 7-way vehicle connector. All you will need is the Curt Easy Mount Bracket item #C58000. This bolts directly…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

What 7-Way and Brake Controller do You Recommend for My 2022 Honda Passport?

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching