Replacement Bearings and Seals for Dexter Axle 8-219 Hub and Drum Assembly

Updated 11/22/2021 | Published 11/20/2021

Products Featured in This Question

Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2

(1072)

$243.94

Replacement Trailer Hub Bearing - 14125A

(136)

$15.94

Replacement Race for 14125A Bearing

(1236)

$2.88

Replacement Race for 25580 Bearing

(1236)

$15.06

Replacement Trailer Hub Bearing - 25580

(2074)

$21.82

Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2

(589)

$259.69

etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K

(3026)

$186.02

Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL

(2617)

$11.96

Grease Seals 10-36 (pair)

(2371)

$6.40

Question:

Hello I would like to get a brake kit and new bearings and seals. From my tag it says Dexter P-15 SLR SN D 6708745 my drums have 8-219 1024 Diameter 12.09 I think thats it, I hope this is enough info. Any help would be greatly appreciated. Thanks

asked by: Jonathan

Helpful Expert Reply:

Thank you for all of that information, it really helps boil down what you're needing.

If you're wanting to replace the entire hub and drum assembly then you can use part # 8-219-4UC3 for a standard spindle or part # 8-219-4UC3-EZ if you have an EZ Lube spindle. These come with grease seals for a 2-1/8" diameter spindle so if you have a grease seal that uses the 2-1/4" inner diameter you'll need to swap out the grease seal with part # RG06-070 so that it fits properly. The electric brake kit # AKEBRK-7-SA uses self-adjusting brakes that match up to what you need.

If you just want replacement bearings and seals then you need the following:

Inner Bearing - # 25580 (uses race # 25520)
Outer Bearing - # 14125A (uses race # 14276)
Grease Seal - # GS-2125DL for 2-1/8" spindle or # RG06-070 for 2-1/4" spindle