What Are the Bolt Sizes in the 2 Shank Adapter for Yakima Manufactured after November 2015

Question

Question:

Can you tell me the size of the M4 and M8 screws for the 2inch Shank Adapter for Yakima Ridgeback or FullTilt Bike Rack - Manufactured after November 2015? I lost two of M4 screws and want to get a replacement.

asked by: Matthew

0

Expert Reply:

I contacted the manufacturer about the size of the screws for the 2" Shank Adapter for Yakima Ridgeback or FullTilt Bike Rack - Manufactured after November 2015 # 8880612. The manufacturer said that the screw size is (1) M8x12 bolt and (2) M5x10 bolts.

expert reply by: Scott S

0

Answer 1

Hi Harmon! Absolutely, for the Yakima FullTilt 4-Bike Rack on your Tesla, the Replacement ZipStrip Straps #Y55XR you were looking at are actually the correct set. These will fit your FullTilt like a glove. The set comes with 2 of the ZipStrips, so if…

view full answer...

Answer 2

The adapter I recommend using to convert the 1-1/4" shank on the Yakima Dr. Tray for use with a 2" hitch is the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver part #HT02. This is really the only way to use this rack with a…

view full answer...

Answer 3

Hello Cody, For you Dr Tray bike rack that has a 2" receiver, you will need the Replacement SpeedKnob and Wedge Assembly for Yakima Bike Racks #8880508. The Dr Tray is not listed because the rack is no longer made, but we have confirmed with…

view full answer...

Answer 4

The preferred method to install your Yakima HoldUp Bike Rack #Y02445 with your 2" hitch is to use the Replacement Tongue for Yakima HoldUp Bike Racks #8880580. Since this replaces the shank and isn't using an adapter it will help prevent any…

view full answer...

Answer 5

Hello Gilberto, Thank you for the links, they were most helpful. The Tesla bike rack that you have is identical to the Yakima FullTilt 4. Yes, the Replacement ZipStrip Straps for Yakima Standard Bike Rack Cradles - Qty 2 #Y8890297 are the correct…

view full answer...

Answer 6

If you look at the provided diagram, you can see the replacement parts that Yakima offers for your Ridgeback Bike Rack. If what you're needing isn't shown, please let me know what you're needing. Zip strips #Y8890297 Endcap #8890306…

view full answer...

Answer 7

Your Yakima FullTilt features a SpeedKnob that tightens the rack inside your hitch to reduce noise and movement. Based on your photo, it looks like the anti rattle device on the adapter is slightly expanded, preventing it from going into your 2 inch…

view full answer...

Answer 8

Since you got the FullSwing in 2016, and your cradle has a black release button (thank you for the photo by the way), unfortunately the 8890297 you got are incorrect. So what you need are the Replacement ZipStrip Straps for Yakima SuperCush Bike Rack…

view full answer...

Answer 9

For your Yakima bike rack with the older cradles with the grey release buttons you will need the Replacement ZipStrip Straps for Yakima Standard Bike Rack Cradles - Qty 2 #Y8890297 which will be an exact replacement. I included a video of the…

view full answer...

Answer 10

Thank you for your purchase of the Yakima FullTilt #Y02463! What you are experiencing should not be happening but I think I know what's going on. When you start tightening down the anti-rattle knob you'll want to move the rack around a little…

view full answer...

Answer 11

To correctly identify the correct shank adapter for your Yakima Ridgeback, part #Y02457, you'll need to measure the holes at the end of the shank that the adapter will go over. The adapter holes for the older racks made before November 2005 are…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...