Replacement Adapter Wiring For Mopar Flat Towing Harness On a 2019 Jeep Wrangler

Published 10/26/2021

Question:

I have a 2019 Jeep Wrangler unlimited with Maximus 3 tow loops in front and appears to be have the lights wired for flat towing. It has what I think a Mopar proprietary electrical connector mounted on the front bumper. I have attached a pic of the mating connector. Do you sell the harness in this picture? This pic is from a complete flat tow wiring kit from Mopar. They dont sell the jumper harness separately. I dont want to buy the whole kit to just get the jumper harness. Can you help with any suggestions?

asked by: Russ P

Expert Reply:

I do have one suggestion as we do not carry that Mopar specific harness.

I recommend the Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit # RM-146-7. For me this is a better route to go as the connections will be much easier attached and removed from your 2019 Jeep Wrangler Unlimited when you are setting it up for towing or removing it from tow. The coiled electrical cable will also allow for the wiring to sit higher while towing and will be less likely to drag on the ground and become damaged. If it would become damaged these are also more easily found as a replacement when you are on the road. You can identify what the wiring connections are on Mopar side of the harness and wire them to the 6-way connector that will mount to the Jeep.

expert reply by: Bud M