Is The Mopar Recreational Flat Tow Wiring Kit Part 68321424AB Required To Flat-Tow a Jeep Cherokee

Question

Question:

Manual states I need to get a steering wiring kit from Mopar to avoid the death wobble for my Jeep Cherokee. Cant find one at any dealer and they arent aware of it. Help!

asked by: Alan G

0

Expert Reply:

The Mopar Recreational Flat Tow Wiring Kit part 68321424AB is required on select Jeep Cherokee's in order to activate the electronic power steering (EPS) system while the vehicle is in tow mode. This part must be obtained from the dealer but since you have a part number now that should make things easier on their end. If they still cannot find this then you can have them reference the Technician Service Bulletin 08-010-17 (unless superseded).

If you can provide me with the year of your Jeep Cherokee I may have more information on whether or not the Mopar Recreational Flat Tow Wiring Kit part 68321424AB is required and the rest of the parts needed to complete your flat-tow setup.

expert reply by: Conner L

0

Rodney C.

1/11/2020

I have a 2015 Jeep Grand CHerokee Overland. Is the flat tow wiring kit required on my vehicle? Thank you.

Jacob H.

1/15/2020

Yes, you will be required to have all the proper lighting and breaking functions to be able to flat tow your 2015 Grand Cherokee. I will provide a few links so that you can take a look at a few different kits that we have available for your car.

Helpful Links

tbbrake-2015_Jeep_Grand+Cherokee.htm

tbwiring-2015_Jeep_Grand+Cherokee.htm

towbar-2015_Jeep_Grand+Cherokee.htm

Chris

5/9/2020

If I have a 2019 Jeep Cherokee Trailhawk, do I need the flat tow wiring kit to peer the steering? If not how to get the steering powered? I can’t figure that out.. thank you in advance

Chris R.

5/12/2020

The Mopar harness mentioned above isn't needed for your 2019 Jeep Cherokee Trailhawk (Jeep resolved this issue starting with the '18 model year vehicles). Instructions for getting the Jeep ready for flat towing, including making sure the steering wheel is unlocked, should be outlined in your owner's manual.

Edwin D.

5/31/2020

@ChrisR Are you sure on the issue was fixed in 2018? I just bought a 2019 and it has electric power steering (EPS) and am assembling my required parts list. Is there a TSB or official notice from FCA?

Chris R.

6/3/2020

@EdwinD Jeep did make changes to the newer model Cherokee's that eliminate the need to use that Mopar harness for flat towing. You will not need to add this to your parts list for the '19 Cherokee.

See All (14) Replies to Chris ∨

Jim G.

4/14/2024

What is the best method to flat tow my 2020 Jeep Cherokee Trailhawk as well as my 2007 Wrangler behind my RV? The Cherokee will be for long trips and the Wrangler for short hauls to the coast and desert.

William C.

6/30/2024

I have a 2016 Jeep Cherokee Trail Hawk and am explore death wobble, what parts do I need to order? And what service bulletin should I reference ? Thank you for your assistance!!!

Raymond M.

8/29/2024

Hello Conner Would I need this for a 2018 Jeep Cherokee Trailhawk? Thank you

Robin H.

8/29/2024

@RaymondM I believe the 2018 still needs it but the best thing to do is reach out to your local dealer and have them check to be sure.

Jerald D.

4/9/2025

What is the requirements to flat tow a 2016 Jeep Cherokee Trailhawk? I read about a wiring harness for the power steering to prevent the "death wobble" experienced by multiple drivers. Can you enlighten me? Sincerely, Jerry Duffman

Jameson C.

4/9/2025

@JeraldD Yes it is true you will need that harness to flat tow your Trailhawk for the reason you mentioned. Our understanding is that it activates the power steering which then keeps the steering components held strong enough that the death wobble won't occur. You can only get that harness from a Jeep dealer though.

Jerald D.

4/9/2025

@JamesonC : Thanks for your prompt reply. I am investigating / obtaining the Flat Tow Harmess. Jerry D *

Jameson C.

4/9/2025

@JeraldD Sounds good! Once you get it let us know if you need the other components to flat tow.

John B.

2/26/2026

do I need the flat tow steering kit for my 2016 jeep cherokee trailhawk

Kate F.

2/26/2026

@JohnB Hey there John! No, you do not strictly need the flat tow steering kit to flat tow your 2016 Jeep Cherokee Trailhawk, but it is strongly recommended. The kit keeps the electric power steering powered and helps prevent battery drain while towing. If you choose not to install it, you will need to run a charge line from the motorhome to maintain the battery. The flat tow steering kit is a Mopar part and must be purchased directly through a Jeep dealership. Do you need help with a flat tow set-up? If so, let me know what you do have and I can get the rest.

Show All (8) Replies

Hide Replies

Answer 1

Hopkins offers a flex cable, part #HM47053 that sounds exactly like what you need. On one end, it has the 7-way plug that's compatible with your RV, and a 6-way plug on the other that would plug into your towed vehicle. I'll link you to some…

view full answer...

Answer 2

There is a solution to fix death wobble on your 2017 Jeep Cherokee Trailhawk. You will need to purchase and install Mopar flat-tow wiring kit 68321424AB before flat towing your vehicle, as per Jeep tech bulletin (08-010-17). This kit is available at…

view full answer...

Answer 3

The recreational towing section of the owner's manual for your 2017 Jeep Cherokee states that using the wiring kit for this particular vehicle is indeed necessary. They go on to caution that "Failure to use the proper Mopar wiring kit to…

view full answer...

Answer 4

If you are referring to the Mopar harness that fixes the steering stability issue, then it was resolved by Jeep starting with the 2018 models so you won't require it. For lighting, you can use a Mopar wiring kit if desired, but there are other…

view full answer...

Answer 5

While it's true that the Mopar 68321424AB wiring harness has been required in the past, that changed a few model years ago so you will not need it to flat tow your 2021 Jeep Cherokee. For a complete flat towing setup you will need a base plate…

view full answer...

Answer 6

Yes, the Mopar flat-tow wiring kit 68321424AB is required to keep your 2018 Jeep Cherokee from death wobble if you flat tow. This can be acquired through your local Chrysler or Jeep dealership, and I would try to press them to handle it all for you…

view full answer...

Answer 7

The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.

view full answer...

Answer 8

I called Lippert about your question on the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model, #LC157511. Their Tech Rep stated that the two smaller wires are to power the brake release/engage on the slide and should be…

view full answer...

Answer 9

The installation of the Roadmaster Nighthawk Tow Bar will not take much time at all, though I believe you are asking about the time for the entire flat tow set up for your 2017 Jeep Grand Cherokee. This will of course depend on who is doing the…

view full answer...

Answer 10

You can absolutely do that! What you'll want, in that case, is to use the Blue Ox Base Plate Kit #BX1128 instead of the Roadmaster #RM-521440-5 base plate kit. Now you will be able to use the Blue Ox Ascent Non-Binding Tow Bar #BX4370 you…

view full answer...

Answer 11

You are on the right track and everything you have so far is a great choice for flat towing your 2018 Jeep Grand Cherokee. The Blue Ox base plate kit part #BX1128 is a confirmed fit. I attached an install video for the kit for your installer to check…

view full answer...

Answer 12

Hey Wanda, since what you have is a A-300 series Klauber motor the correct replacement would be the part #LC157511.

view full answer...

Is The Mopar Recreational Flat Tow Wiring Kit Part 68321424AB Required To Flat-Tow a Jeep Cherokee

Continue Researching