Ball Mount Options For a Trailer With Minimal Ground Clearance
Updated 06/11/2013 | Published 06/07/2013
Question:
My trailer sets to low to the ground on reglur ball hitch . I need one that sets higher then the reglur hitch. My trailer empty wt 1000. Carring capacity 3400. What do you recoment. Its a 2inch ball hitch.
asked by: Franko G
Expert Reply:
There are two ways to level your trailer. One is to use a ball with a rise on it such as Curt # C40034 that you referenced. This part will work as long as your ball mount has a 1 inch diameter ball hole and you need only 2 inches of rise.
The other way is to get a ball mount with the required rise. The first step is to find out exactly how much height adjustment is actually required to level your trailer. With the vehicle and trailer uncoupled on level ground, measure the hitch height from the ground to the top of the receiver opening, then measure from the ground to the bottom of the trailers coupler with the trailer frame level. The difference in the two measurements will tell you the rise needed.
I have attached a FAQ article that also covers this method and will give you the way to measure to find out which ball mount you will need. Once you know the rise needed check out the product links attached. Two links are for the ball mounts available and the other link is for the balls. The ball mount links are for the 2-inch and 1-1/4-inch units
The ball pages I have linked are for a 2 inch ball and 1-7/8 inch ball.
Product Page this Question was Asked From
2" Hitch Ball - 2" Rise - 1" Diameter x 2-1/8" Long Shank - 6,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- High-Rise Ball
- Chrome
- 6000 lbs GTW
- 2 Inch Diameter Ball
- 1 Inch Diameter Shank
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: curt wiring harness
- Search Results: trailer wiring
- Video: Installing the Curt Trailer Hitch Receiver on a 2022 Infiniti QX60
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Hitch and 4-way Connector Confirmed to Fit the 2022 Nissan Pathfinder
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Pollak Wiring Harness Extension - 7-Way RV - 3' Long
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: How to Choose a Trailer Brake Controller
- Article: Trailer Wiring Diagrams
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Suspension Enhancement
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer jack
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Shop: Brake Controller
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
on Trailer Hitch Ball
