Will The Curt Multi Fit Hitch C13902 Fit On A 2002 Dodge Ram

Question

Question:

I am haveing a lot of trouble finding the right hitch will this fit my truck

asked by: Cohen M

0

Expert Reply:

The Curt Trailer Hitch Receiver - Multi Fit - Class III - 2" # C13902 is compatible with most full-size pickup trucks and Dodge/Ram is included among them. From what I could find out, there should be little to no drilling to get this installed on your 2002 Dodge Ram as well, so I highly recommend it.

However, if you have a 2500 or 3500, we do have heavier duty options available. Though it will depend on the bed length, the Curt Class V # C15318 will fit the 6-1/2 foot bed and the # C15319 will fit an 8 foot bed. If you have a 1500, the # C13902 will be the heaviest option available.

expert reply by: Lazer S

0

Answer 1

Hey Derek! That part number isn't available on our site anymore, but it doesn't look like it was a fit for your 2004 E350 van anyways. I verified some bolt hole to bolt hole measurements on a couple hitches that are a fit for your vehicle:…

view full answer...

Answer 2

I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.

view full answer...

Answer 3

There are several Curt and several Draw-Tite hitches available for a 2009 Ford E-250, depending on which model E-250 you have. Is your van a Superwagon? How much weight are you needing to pull? This information will help narrow down the hitches that…

view full answer...

Answer 4

The Curt #C13900 will fit frames up to 41 inches but it isn't the best option for your Jayco Pinnacle fifth wheel trailer. There are hitches made for RVs that I recommend using because they are designed to bolt or weld onto RV frames as opposed…

view full answer...

Answer 5

Hello Jim. The Curt Multi-Fit Hitch #C13902 is intended for Ford, Chevy and Ram Trucks. The bolt holes are 39-1/2" apart across, so as long as your Ford Van has this same frame width it will work great with a little drilling/modification. For…

view full answer...

Answer 6

We have similar higher towing capacity Curt trailer hitches that fit your 1997 Dodge Ram like with the #C15318 but the #14374 does not fit your year truck.

view full answer...

Answer 7

The options for a trailer hitch receiver for a 1995 Dodge Ram 3500 are only dependent on if you have a standard or step bumper, or if you have a deepdrop bumper. Having a dually isn't going to factor into the fit, as the hitches fit both single…

view full answer...

Answer 8

We offer three Class V Curt hitches for your 1995 Dodge Ram 3500 4WD Dually Diesel that can be seen on the linked page. All share the same 2400-lb tongue weight (TW) and 16K maximum trailer weight ratings, and all increase to 17K GTW if used with a…

view full answer...

Answer 9

The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" #C15300 and the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" #C15318 are both a confirmed fit for your 1997 Dodge Ram with standard or step bumper. These have the…

view full answer...

Answer 10

Sorry to hear about your fitment issue! From the looks of your order with us, you bought the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" #C15318. This model is confirmed to fit some 2001 Dodge Ram Pickup 2500 models. It will not…

view full answer...

Answer 11

I checked with Curt and the distance between the vertical mounting flanges of the Curt #C15300 is 33.312 inches.

view full answer...

Answer 12

I had our warehouse measure the Curt Trailer Hitch Receiver #C15703 you were looking at, and has an overall width of 40-5/8", overall length of 29". The distance between the vertical mounting holes is 14-1/2" center to center, and the…

view full answer...

Will The Curt Multi Fit Hitch C13902 Fit On A 2002 Dodge Ram

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching