We'll connect you with nearby partnered installers who know this exact setup.

CURT

Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"

Part Number: C15319

80 Reviews | 21 Questions

In Stock

$460.39

Retail:$677.66

You Save: $217.27

Not Confirmed to Fit

2010 Honda Fit

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

curt trailer hitch class v 2400 lbs wd tw c15319

curt trailer hitch for towing 2400 lbs wd tw receiver - custom fit class v xd 2 inch

curt trailer hitch 17000 lbs wd gtw 2400 tw c15319

curt trailer hitch for towing 2400 lbs wd tw

curt trailer hitch class v 17000 lbs wd gtw

Show All (7) Product Images

Show Fewer Product Images

Customer Photos

Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" customer photo

Show All (6) Customer Images

Show Fewer Customer Images

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" part number C15319 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (80)
Q & A (0)
Related Parts
Photos

CURT Trailer Hitch - C15319

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Tows up to 16,000 lbs (GTW): Handles heavy trailers, campers, or equipment loads safely
Supports up to 2,400 lbs (TW): Works with large cargo carriers and heavy-duty towing setups
Bolt-On Design: Installs with included hardware using standard tools – no welding needed
Class V 2" Receiver: Fits a wide range of heavy-duty towing accessories and ball mounts
Powder Coat Finish: Black coating over protective base resists rust and corrosion over time

Features to know about

Handle Heavy Loads with Confidence: Class V Strength for Serious Towing

Built for demanding towing tasks, the Curt Trailer Hitch Receiver - Class V XD - 2" delivers robust performance with a maximum gross trailer weight of 16,000 lbs and a maximum tongue weight of 2,400 lbs. When used with weight distribution, it can handle up to 17,000 lbs GTW while maintaining the same 2,400-lb TW. The precision, robotic welding ensures consistent strength across the hitch, so you can count on solid performance when hauling heavy trailers or equipment.

Easy Bolt-On Installation: No Welding or Complex Tools Needed

Installing this hitch doesn’t require welding or special shop tools. The bolt-on design uses the included complete hardware kit and fits directly to the frame. With properly aligned mounting points, you can get solid attachment without modifications. Some vehicles may need drilling depending on manufacturing variances, but for most applications it’s a straightforward install you can handle in your own space.

Built to Last in Rough Conditions: Powder-Coated Steel Resists Corrosion

The sturdy, square-tube steel construction is coated with a protective base layer and a black powder coat finish for superior rust resistance. This combination helps protect against road grime, salt, and moisture while keeping the hitch looking clean over time. It’s ready for years of towing without the worry of corrosion or wear breaking down the structure.

Ready for Your Towing Setup: Standard 2" Receiver Opening

With a 2" x 2" receiver opening, this hitch works with a wide range of towing accessories such as ball mounts, cargo carriers, and bike racks (sold separately). Whether you’re setting up a heavy trailer or adding utility gear to the back of your vehicle, the standard receiver size gives you flexibility to use what fits your setup best.

Specs

Receiver Dimensions

Receiver opening: 2" x 2"

Weight and Capacity

Rating: Class V
Maximum gross trailer weight: 16,000 lbs
Maximum GTW when used with weight distribution: 17,000 lbs
Maximum tongue weight: 2,400 lbs
Maximum TW when used with weight distribution: 2,400 lbs

Warranty

Limited lifetime warranty

15319 CURT Trailer Hitch Receiver - Custom Fit - Class V Xtra Duty- 2"

Installation Details C15319 Installation instructions

This Product Fits The Following Vehicles

2002 - 2002 Dodge Ram Pickup 2500 and 3500 - Pickup with 8 Foot Bed
1994 - 2001 Dodge Ram Pickup Pickup - 8 Foot Bed - Standard or Step Bumper

Customer Satisfaction Score:

94% were satisfied with this product

6% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Package not accepted

6% of customers were not satisfied

Product did not meet expectations
Wrong item was ordered
Package not accepted

4.7

80 reviews

5 Stars		(67)
4 Stars		(9)
3 Stars		(1)
2 Stars		(1)
1 Star		(2)

by: William 07/18/2026

1999 Dodge Ram Pickup

I paired this hitch with a ranch hand, legend bumper, which was no easy task. It require required more spacers longer bolts and washers to get it to fit overall, I am happy with the results. If you're going to go this route, you may consider having it installed professionally.

Click to Enlarge

Kate F.

7/21/2026

Way to go with getting the install completed William! Thanks for including the picture, install looks great. What do you mainly use your hitch for?

by: Allen 08/07/2026

Fit perfectly no drilling needed. Very heavy duty.

by: Charles 03/19/2026 One Year Later

2001 dodge Ram Pickup

Install went great. Everything aligned well. Definitely heavier that my last receiver so get help when you install it. I do wish it had a place for the plug-in. Using it on my 2001 Ram 2500.

by: Mickey 05/30/2026 One Year Later

dodge Ram Pickup

2000 dodge ram 2500. Install only took about 30 minutes. Works great!

by: Jason 05/21/2024 One Year Later

No issues with the hitch receiver other than safety chain holes could be a litter bigger so the snap on the chains snap

Jason One Year Later

5/22/2025

So far working out very well, I pull a 14’ dump trailer and a 16’ enclosed trailer on a daily basis and haven’t had any issues

Nick S.

5/22/2025

@Jason That is a great heavy duty hitch you're using daily. I love to hear its working out great for you still! Are you hauling anywhere near the 16k its rated for or something lighter?

by: Rachel 05/11/2020

We are very happy with our new hitch, fits perfectly. Received in time promised. Did not have to drill holes or weld, just bolted on. Thank- you etrailer!

Click to Enlarge

by: Michael 11/21/2021 One Year Later

Great hitch. Super heavy duty.

Click to Enlarge

by: Christopher 06/24/2025

It’s a nice heavy hitch. While the mounting holes fit existing holes in the frame two of the three holes are oversized in my frame. There are other holes that would be better structurally in the frame. Other wise the hitch works well.

by: William 05/15/2026

Fitment was perfect, nice strong hitch. Much better then the oem one.

by: Chris 05/21/2021

2001 Dodge Ram Pickup

Hitch quality is great. Only complaints-the chain hookups are very close to the receiver tube. If you have a hitch pin lock, you can’t easily connect your chains, or at all. Also, the hitch fits very close and tight on a 2001 Ram. Takes some time tightening and using a car jack to force It into position. Tighten carefully or you will break/strip bolts.

Chris One Year Later

6/7/2022

Hitch has been great. Has towed 10k+ lbs many times. Never came loose or any issues.

by: Stacy 04/30/2025

Ram 3500

Nice beefy heavy duty upgrade over my cracked factory 97’ Dodge 3500 hitch. Bolted right in my long bed and would recommend to anyone looking for a stout hitch. Even makes the truck look tougher LOL

by: Thomas 11/05/2018

1995 Dodge Ram Pickup

I ordered this to replace a factory hitch that was damaged in an accident. The hitch appears very strong. It is both heavier and longer than the factory hitch, which means to me that from a layman's engineering standpoint, it will spread the load better along the frame. Although the sales data on the e-trailer site said I would need to drill, mine bolted right on. Fits up nicely underneath the bumper. Spare tire(285/75 x 16) fits with no issues.
The only things that I observed that were less than stellar were that the top gusseting brace was not positioned square to the trailer hitch, and was welded in place crooked, Welds look good and strong, and the crooked piece won't be seen under the bumper. Also, the finish was damaged in several places, nothing serious, but since I live in an area that uses road salt, I will refinish it anyway. Powdercoat will not hold up long term in our environment.
All in all, my take is that this is a very strong product at a great price with less than perfect detailing. That was exactly what I needed.

Heather A.

11/6/2018

If you live in an area with a lot of salt on the road it is a good idea to spray the hitch off with fresh water periodically. Check for scratches and touch them up with a rustoleum type of paint.

by: Chuck 04/04/2019

2001 Dodge Ram Pickup

The receiver arrived in excellent condition with no transportation bruises. Installation was straightforward once I figured out the logic of 2 different sizes of bolts, we were on our way. The instructions and illustrations regarding the mounting bolts were not clear. It is a beautiful product with excellent fit.

Provisions to mount the trailer plug receptacle would have certainly been appreciated. I had to cut the bracket off the old receiver and weld it to new one.

Click to Enlarge

by: Albert 10/18/2024 One Year Later

The Hitch Works Great! HOWEVER! Etrailer sent me the wrong hitch at first. Their website was deceptive on the description for my hitch on my Dodge 3/4 ton LONGBED. Anyway, I had to send back the first one and they sent me a tag to ship it back. I WAS NOT AWARE THAT I WAS GOING TO PAY FOR THAT RETURN SHIPPING. SO, I ended up paying for almost 2 HITCHES when you factor in the price of shipping. DO NOT RETURN HITCHES OR ANYTHING FOR THAT MATTER TO ETRAILER. I WILL NEVER BUY ANYTHING FROM THEM AGAIN!

by: Alan 01/22/2020

1998 Dodge Ram Pickup

Excellent product and fitment, very fast and reliable shipping! Good price also! Very glad I purchased this product from eTrailer! Would definitely recommend!

Alan One Year Later

1/23/2021

Great product, great fit!

by: Bruce 09/11/2022

This Curt XD hitch replaced the seriously abused 20+ year old stock factory Dodge hitch on my 2001 Ram 2500, which I overloaded on a regular basis. Rated at only 5,000 lbs weight carrying/10,000 weight distributing I hauled a lot of 6000-8000 lb trailers and it held up until the flanges finally let go. I figured the Curt XD hitch, rated at 16,000 lb weight carrying would be a great replacement.

The Curt XD is seriously overbuilt with thicker steel and larger/longer flanges than the original, It was a tight fit on my Dodge but it squeezed in, with the frontmost mounting point going well in front of the spring mount, as opposed to the original. If you follow the instructions, which have you using the large hole on the back of the frame with the 9/16" hardware provided (which is a bit counterintuitive) the middle hole just lines up and the front hole has to be slightly drilled out using a 1/2" bit.

The hardest part was raising it in place as it's much heavier and off-balance than a smaller hitch. I ended up using a large C-clamp to attach it to my floor jack which worked great. I put it up high enough to hang it from the rear and middle bolts then cinched them up by hand, after which I drilled the front bolt hole and tightened everything down. The estimated install time of 20-40 minutes might be possible with a NASCAR pit crew, an hour or two is much more realistic! But once it's in, should be a lifetime piece.

by: Conrad 07/19/2024 One Year Later

excellent hitch and great to work with the folks at etrailer. also ordered the wiring kit and trailer brake controller. videos were very helpful with the wiring.

by: Travis M. 12/16/2016 One Year Later

2001 Dodge Ram Pickup

Etrailer is very easy to deal with. They answered all my questions and provided me with additional information upon request. The Curt hitch fit and was somewhat easy to install (no fault of manufacturing, just a heavy chunk of steel). This unit meets all my requirements and sits up tighter under the chassis than the stock dodge hitch did.

by: John 08/15/2023

2002 Dodge Ram Pickup

This 16,000 lb hitch receiver is built with quality. The fit is excellent. The rear section of the hitch receiver is reinforced as it should be.

One concern I did have is that the rear reinforced holes are not a full circle. The nut does not have full contact area and the ears could spread during the torquing procedure. I elected to add hardened steel flat washers above the nut on the rear fasteners. These washers will allow for the full clamping force without deflecting the ears.

This hitch receiver will be put into use in two days pulling an 11,000 lb trailer (scaled load). I have no concerns with the capability of this hitch receiver.

One of the things I like about this hitch receiver is that the maximum tongue weight limit is the same whether weight carrying or using a weight distribution hitch. This is important to me.

I highly recommend this hitch as an upgrade.

by: Phillip 11/25/2020

2001 Dodge Ram Pickup

Installed on a 2001 Dodge Ram 2500 long bed w/ standard bumper. I haven't got to put a bunch of weight behind it yet, but will today. This hitch is definitely better engineered and heavier than the stock one was. I did not have to drill any holes because it lined up with a couple of holes from the previous hitch, otherwise I would have had to drill the 2 holes for the middle mount holes. Read carefully, you utilize the large 11/8" holes in the frame that are there from the factory for the rear mounting holes. As long as you do that everything works perfect. Super easy to install. Great product so far.

by: DcN 04/27/2015

to be honest I had looked on Amazon first but could not find the heavy duty hitch I was looking for I'm glad I found etrailer not only did I find what I was looking for but it was a cheaper pricef or a heavier duty hitch then Amazon was selling for a higher price

by: Ryan 12/17/2024

Nissan Leaf

One of the tabs interfered with the leaf spring mounting point so I had to trim about 1 sq-in of material off of it to provide clearance to sit tight to the frame. Other than that, assembly and design on it was all very stout.

by: John 04/17/2021 One Year Later

I purchased this hitch after exceeding the limits of my factory unit. It has worked flawlessly ever since. Only wish it came with a mount for the factory electrical plug.

by: David 01/15/2022

2002 Ram 3500

This does not bolt on to a 2002 dodge 3500 cab and chassis single cab. I knew that going in so no big deal. About 30 mins of drilling and it was installed. I bought the hitch from etrailer only because of their customer support when I called for help. They went above and beyond to help.

by: James d 07/25/2019

1999 Dodge Ram Pickup

Ez bolt on !! Very nice product and bought other hitches before all ez to use and do it your self products will definitely buy again.. every helpful staff if you have and problems or concerns contact customer service and they will help you with anything to make things easier. If you order on weekends or late Friday don't expect it to ship till Monday afternoon evening ..3 day shipping is m-f business days only..other then by the shipping had no problem...will not pay more for shipping next time to get it sooner on a die line.

true

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?

Does Aftermarket Bumper For 2001 Dodge Ram 2500 Need to be Replaced to Use Class V Hitch
Hi Don, There aren't any Class V hitches that will work for your 2001 Dodge Ram 2500 with your aftermarket bumper, so you'll have to revert to a different bumper if you'd like to install one, and that includes the Curt hitches you mentioned. Since you don't have the factory bumper you can't use the Curt Trailer Hitch Receiver # C15319, so you'd have to go with the Curt Trailer Hitch Receiver # C15300.
view full answer...
Will The Curt Hitch C15319 Fit Under Roll Pan Bumper On 1997 Dodge 2500 Long Bed?
Hello Jonathan, thanks for reaching out. The Curt Trailer Hitch # C15319 will not fit with the roll pan bumper on a 1997 Dodge 2500 long bed. It will only work with the standard factory bumper. I was able to confirm this with my contact at Curt. Sadly, we do not have any hitch for the roll pan bumper.
view full answer...
Dimensions for Curt Hitches 15300, 15511, 15318, 15319
I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.
view full answer...
Differences Between Curt Trailer Hitches # C15318 and # C15319 on a 1997 Dodge Ram with 8 Foot Bed
On your 1997 Dodge Ram with an 8 foot bed both Curt hitches # C15318 and # C15319 are confirmed to fit. They also install in basically the same way and have the same capabilities so either will work just as well as the other for you. The difference between the two is which which trucks they fit. Part # C15318 fits a wider range because it also fits on the 6-1/2 foot bed because there is an extra bolt hole on the hitch that the short bed needs. Part # C15319 only fits the long bed. ...
view full answer...
Comparison of Curt Class V Hitches # C15300, # C15318 and # C15319 for 1998 Dodge Ram 2500 Longbed
The three Curt trailer hitches that you referenced, parts # C15300, # C15318 and # C15319, all are 2-inch Class V hitches that share common weight ratings and all fit your 1998 Dodge Ram 2500 Longbed with a factory standard or step bumper. All three can be seen on the link provided for you. The difference between them is that the # C15300 fits some Ford F-Series and Bronco trucks in addition to fitting your 1998 Dodge Ram. This hitch will not fit trucks with a roll pan bumper and installation...
view full answer...
Difference Between Curt Hitches C15318 and C15319 for 1997 Dodge Ram 3500
The Curt Class V part # C15319 and the # C15318 both do fit your 1997 Dodge Ram 3500 single cab but the difference is the bed length that either hitch is designed to fit. The part # C15319 is for the long bed trucks and the # C15318 is for the short bed trucks. The difference being the mounting flange bolt hole setups for the different bed lengths.
view full answer...
Will The Curt Multi Fit Hitch C13902 Fit On A 2002 Dodge Ram
The Curt Trailer Hitch Receiver - Multi Fit - Class III - 2" # C13902 is compatible with most full-size pickup trucks and Dodge/Ram is included among them. From what I could find out, there should be little to no drilling to get this installed on your 2002 Dodge Ram as well, so I highly recommend it. However, if you have a 2500 or 3500, we do have heavier duty options available. Though it will depend on the bed length, the Curt Class V # C15318 will fit the 6-1/2 foot bed and the # C15319...
view full answer...
Comparing Curt Hitches # C15319 & # C15318 for 1995 Dodge Ram 3500 4WD Dually Diesel
We offer three Class V Curt hitches for your 1995 Dodge Ram 3500 4WD Dually Diesel that can be seen on the linked page. All share the same 2400-lb tongue weight (TW) and 16K maximum trailer weight ratings, and all increase to 17K GTW if used with a weight distribution system. The difference between Curt hitches # C15318 and # C15319 is that C15318 installs without drilling while C15319 may require some drilling due to vehicle manufacturing variances. I have linked a video for hitch C15318...
view full answer...
Recommended Class V Trailer Hitch Receiver Made in USA for 2002 Dodge Ram 2500 and 2500 Series Truck
The Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2" # 41923 for your 2002 Dodge Ram is made in Mexico. It is made to US standards and Draw-Tite is an American company. If you are wanting a USA manufactured trailer hitch, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15300, # C15319, or the B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2" # BWHDRH25132. For an even heavier duty option made in the USA, I recommend...
view full answer...
Troubleshooting Bolt Holes on Curt Hitch C15319 That Don't Line Up Perfectly with Vehicle Frame
In some cases trailer hitches can get slightly bent in shipping. Most likely that is not the case for the Curt Hitch part # C15319 since it is such a heavy duty hitch, but it is a possibility. If you can get all the bolts started I would recommend doing that before you go torqueing any of them down. Once you get them all started and then torque them down the hitch should mate right up to the trailer frame like it is supposed to. You would not need to grind on this hitch at all to install it.
view full answer...
Class V Hitch That Fits 2001 Dodge Ram With 6-1/2 Foot Bed
There is an option for a Class V trailer hitch receiver for your 2001 Dodge Ram with a 6-1/2 foot bed, though the Curt Trailer Hitch Receiver # C15319 is only a fit for 8 foot beds. Instead, for your 6-1/2 foot bed '01 Ram, the correct fit is the following: - Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15300 I verified this fit with the manufacturer for you.
view full answer...
Best Class V Hitch for a 1998 Dodge Ram 2500
Good question. No the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" part # DT45513 will not fit on your 1998 Dodge Ram 2500. You will instead want to use Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" part # DT45505. This will be a direct bolt on application and will include all the hardware you need to complete the installation. If you are okay with a 2" opening on the receiver tube instead of the 2.5" I would go with Curt Trailer Hitch Receiver...
view full answer...
Best No Drill Bracket for Attaching a Vehicle Connector To a Trailer Hitch
We do have a no drill bracket that will work great with the Curt item # C15319 hitch. It is the Curt Easy Mount Bracket item # C58000. The Curt easy mount bracket fits over the hitch receiver opening and secures around the lip with the included hardware. I can also confirm that the Curt Trailer Hitch Receiver item # C15319 does fit your 2021 Dodge Ram. If you need a 7-way connector you will want the 7-Way Pre-Wired Car Connector, 7' Lead item # 20023. This is for trucks with the factory...
view full answer...
Recommended Curt HD Bumper Pull Hitch for a 1996 Dodge Ram 2500 Diesel Long Bed
It sounds like you have the 1996 Dodge Ram Pickup with an 8' bed and a standard or step bumper. With this being the case my recommendation is the Curt Trailer Hitch Receiver # C15318 because of the design and how it installs. The Curt hitch I recommended uses 4 bolts on either side and doesn't require drilling while the part # C15319 uses 3 bolts on either side and the part # C15300 requires drilling into the frame of your truck. More hardware and no drilling sounds like a win to me! Check...
view full answer...
Size of the Cross Tube on the Curt Hitch # C15319
I spoke with my contact at Curt and he informed me that the main cross tube of the Curt hitch part # C15319 that you referenced measures 3 inch by 3 inch.
view full answer...
Towing Capacity for a 2001 Dodge Ram 3500
I did a little research on your 2001 Dodge Ram 3500 and found that it's max towing capacity is listed as 13,900 lbs. I would strongly recommend you check the owners manual of your truck to see what Dodge lists as the capacity for your truck and be sure not to exceed this figure regardless of what hitch you install. When determining your overall capacity you must always go with the lowest rated component in the setup as the overall capacity. The Curt Hitch part # C15319 that you referenced...
view full answer...
Trailer Hitch for 2002 Dodge Ram with Ranch Hand Hitch to Sit Flush with Bumper
We have spoke with Ranch Hand before about the fit of trailer hitches with their bumpers and they state that since their bumpers are designed to fit with the factory hitches for the vehicles the aftermarket ones would fit as well. The Curt hitch part # 14001 is a fit for your 2002 Dodge Ram and sits about flush with the factory bumper so it would be your best option. Check out the picture I attached for more info.
view full answer...
Higher Capacity Trailer Hitch that Fits 1998 Dodge Ram 3500
While we don't have a way to increase the weight capacity of your 1998 Dodge Ram 3500 we do have really high capacity hitches that fit your truck like the Curt hitch part # C15319 that have a 16,000 lb trailer weight capacity and a tongue weight capacity of 2,400 lbs.
view full answer...
How to Identify What Bumper Type My 2001 Dodge Ram 3500 DRW Has to Correctly Select a Trailer Hitch
A roll pan bumper is a style of bumper that that will make the back of your tailgate seamlessly flow down your vehicle and give the appearance of flatness. With a roll pan bumper there is no step like a traditional bumper you see on many trucks going down the road. If you would like to send me a picture of the back of your truck I can confirm if it is a roll pan style or not for you. I have linked an image of what a deep drop bumper will look like as well as a standard step bumper for...
view full answer...
Is Drilling Required to Install Curt Trailer Hitch 15319 on a 1998 Dodge Ram 2500
Drilling is not required on all vehicles to install Curt trailer hitch # C15319. However, due to manufacturing variances, some vehicles may require drilling. I have included a link to the installation instructions for you. You should be able to see where this hitch installs and compare it to your vehicle to determine if you will have to drill. With this hitch I also recommend etrailer ball mount kit # EBMK2416. It comes with a ball mount, 2 hitch balls, a hitch pin with clip, and a storage...
view full answer...
Does The Curt Hitch Receiver C15319 Fit 1999 Dodge Ram With Westin Bumper 31005?
The Westin Perfect Match Series Rear Step Bumper - Chrome Plated Steel # 31005 is an OEM-replacement and matches the specs of the factory bumper so it will work well on your 1999 Dodge Ram long bed in combination with the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15319. There will be no issue using these two together. Both parts offer simple bolt-in installation process, requiring no welding. All hardware is included.
view full answer...

Do you have a question about this Trailer Hitch?

Info for this part was:

Expert Research:

Michael H

Expert Research:

Jameson C

Expert Research:

Adam R

Updated by:

Wilson B

Updated by:

Kristina F

Updated by:

Michael B

Updated by:

Isabelle B

Updated by:

Noah M

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.