What 5TH Wheel Hitch Attaches To 5TH Wheel Rails That Don't Have Slots Like Industry Standard Rails?

Question

Question:

Any idea which hitch goes with this rail setup?

asked by: Kareem C

0

Expert Reply:

Currently the only hitch I know of that uses rails different than the ISR Industry Standard Rails is the Demco Hijacker # DM8550032. This uses a different type of Underbed Rail and Installation Kit # DM8551000 that only has 4 holes that the hitch will drop into and lock onto.

While it is possible to have another type of system that may have been discontinued you can send me pictures and measurements of what you do have and I can use that information to determine if there is anything else we can do for your rails.

expert reply by: Bud M

0

Customer Image
(click to enlarge)

Kareem C.

1/1/0001

Any idea which hitch goes with this rail setup?

Gregory M.

10/12/2021

The rails you have are Valley Industries base rails and they are obsolete. No one produces a 5th wheel hitch that will fit those rails currently. I recommend installing the Reese Quick-Install Custom Installation Kit # RP50082-58 for a new set of rails. This will allow you to use a Reese M5 5th Wheel Trailer Hitch # RP30928 or any 5th wheel hitch that will connect to a set of Industry Standard Rails.

Answer 1

Chucking and jarring while towing a 5th wheel trailer (or any trailer for that matter) is unavoidable because the trailer itself is not one piece with your vehicle. When your truck starts to move forward from a stop your trailer is still sitting…

view full answer...

Answer 2

We don't have just the grip you are looking for your Reese M5 but we do have a replacement low profile handle for it with part #RP58553.

view full answer...

Answer 3

If you can tell me your year, make and model of truck, as well as the bed length I would be able to give you all the relevant fit information.

view full answer...

Answer 4

I have a solution for you, but it appears that your truck may have had an older four bolt fifth wheel rail kit based on the number of holes and the dimensions that you provided. The four bolt rail design has been pretty well phased out of the…

view full answer...

Answer 5

Yes, since your Reese 5th wheel hitch attached to industry standard rails in your 2020 Ram 3500 you will be able to mount a larger hitch like the Reese M5 5th Wheel Trailer Hitch item #RP30928. You will be limited by the capacity of the rails.…

view full answer...

Answer 6

Yes, a Reese 20K 5th wheel trailer hitch such as #RP30928 will fit in the same rails as a 16K model. The 16K and 20K both fit industry standard above the bed rails.

view full answer...

Answer 7

Since the Slider, part #RP30048, for the Reese 16K 5th Wheel Trailer Hitch #RP30051 is rated for the Reese 15K, 16K, and 20K 5th-wheel trailer hitches all you will need to do is replace the head and head support. The correct head and head support to…

view full answer...

Answer 8

There are a few different possible Reese hitches you could have from Ford, #RP30921, #RP30922, or #RP30144. The head can move some, this is normal. There should be about a 1/2 inch of movement forward or backward. I have included a link to another…

view full answer...

Answer 9

The 2012 Ford Super Duty trucks with the Ford factory tow prep package use the Reese Elite Series rails. These rails can only be used with the Reese Elite Series hitches and not the B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch…

view full answer...

Answer 10

The lube plate #RP83001 will do the job to keep your pin box from scraping as it slides onto the head of your Reese M5 5th Wheel Trailer Hitch #RP30922 but you can also grease the jaws using a grease gun like #L30132 to apply grease to the grease…

view full answer...

Answer 11

There is an easy way to figure out how to determine what height setting a fifth wheel hitch such as the Reese M5 #RP30890 needs to be in your 2019 GMC Sierra 2500, just keep in mind you will need five to six inches of space from your Silverado's…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What 5TH Wheel Hitch Attaches To 5TH Wheel Rails That Don't Have Slots Like Industry Standard Rails?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching