Replacement Crank for etrailer Powered A-Frame Jack EJ-3520-WBX

Question

Question:

Hi I got this from you guys a couple years ago. I seem to have lost the emergency crank. Do they sell a replacement? Thanks

asked by: Mark C

0

Expert Reply:

We do sell a replacement manual crank for the etrailer jack # EJ-3520-WBX with the part # EJ-3520-HD.

expert reply by: Jameson C

0

Answer 1

You can get a replacement manual crank for your 3,500lb Ram electric trailer jack with part #EJ-3520-HD, which has a 10mm socket.

view full answer...

Answer 2

The etrailer Electric Jack w/ Footplate #EJ-3520-WBX only has one power wire coming out of the jack. It gets its ground connection through the mounting plate which is grounded to the trailer. You can run the power wire to the coach battery on your…

view full answer...

Answer 3

Hey John, I ran out to our warehouse and pulled one of the jacks #e74GV to get that measurement for you. It was a little difficult with how its packed but the length of that jack cable comes in at 48" long. Do you know roughly how much you would…

view full answer...

Answer 4

No, I do not Paul and I doubt Curt or Draw-Tite make anything other than a 4-way for the hybrid model. Aftermarket wiring harnesses for vans are typically limited to 4-way connectors like the item #C63RV for LED lights or the item #C32MJ for…

view full answer...

Answer 5

Hey Jake, thanks for reaching out! You'll actually want to keep the OEM hitch on your 2005 GMC Sierra 2500 to install some TorkLift tie-downs as there aren't any TorkLift tie-downs that fit with the SuperHitch Original #TLC1204. For your OEM…

view full answer...

Answer 6

Hi Jerry; do you have a ductless or ducted setup? For whatever reason the Fogatti InstaCool Ultra #FG72FR is only designed to work with ductless setups, no option for ducted is available at this time. If you have a ductless setup you will need the…

view full answer...

Answer 7

Hey Jason, thanks for reaching out. Looking over all the jacks you mentioned, I believe the etrailer Electric Trailer Jack #e79GV will best suit your needs. The capacity is 3,500 lbs and it has the drop leg. It has an LED light and an emergency…

view full answer...

Answer 8

I am not sure what your exact question is but the Lippert Power Gear Jack 181794 has been discontinued and there are no replacement parts available for this. Therefore, if you have an issue with yours then you will need to replace the entire jack and…

view full answer...

Answer 9

The majority of electric a-frame trailer tongue jacks will have a 3,500 lb weight capacity which is most likely what your old Atwood jack is. If not, the 3,500 lb capacity will be more than enough for you because it only needs to be rated for the…

view full answer...

Answer 10

The correct manual override cover for your 3,500lb electric Ram jack is the Replacement Manual Override Cap for etrailer A-Frame Electric Jack #EJ-3520-BCP. For a cover you can use the Ultra-Fab Protective Cover for Electric A-Frame Jacks…

view full answer...

Answer 11

Since you have a Ram brand electric trailer jack the correct replacement manual override crank is the part #EJ-3520-HD that you referenced which is the correct size of 10 mm.

view full answer...

Answer 12

The correct replacement manual crank handle for the RAM Electric 3,500 Lb Jack part #EJ-3520-BBX is the Replacement Manual Jack Handle for RAM Electric A-Frame Jacks part #EJ-3520-HD.

view full answer...

Replacement Crank for etrailer Powered A-Frame Jack EJ-3520-WBX

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching