Checking Out the Curt TruTrack Weight Distribution System w/ Sway Control Video

Hey Bob, yes the Blue Ox Hitch part #BLU62UR does fit underneath the OEM hitch of your 2023 Ram 2500 and does sit flush as well. I attached a picture that shows this as well.

Hello again, Doug. Thanks for providing all that detailed info. It definitely helps! You are on the right track with the 12K Blue Ox 2-Point Weight Distribution w/ Sway Control #BLU75FR. This will work on trailers with a tongue weight between 800 and…

Hello Brandon, Congrats on the new camper! When picking out the right weight distribution hitch it is most important to be as close to the tongue weight as possible. You said that your tongue weight is around 700 pounds, I am not sure if you are…

That is not normal wear for the L-Brackets on your Blue 2-Point #BLU75FR to be that worn. It looks like you have too much angle in the head, so I recommend trying to tilt the L-brackets a little to try and get the bar less on just that one edge, and…

The correct rear TorkLift Tie-Downs for the TorkLift SuperHitch Original Trailer Hitch Receiver #TLD1109 installed on your Ram 2500 is the Kit #TLR3507, which install directly to the side plates as you can see in the attached photo. With a standard…

Hey Kevin! In order to use an extender that long we'll need to get the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TLD1108-30 installed on your 2017 Ram 3500 Dually. This then enables you to use the 42" TorkLift SuperTruss Hitch…

When it comes to installing a trailer hitch on your 2018 Ram 2500 8 Foot Bed With Factory Hitch The TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2 inch #TLD1109 is confirmed to fit your vehicle and you will not have to…

The old Reese V-5 weight distribution system is not rated by the vehicle. It will be compatible with vehicles and trailers determined by the loaded tongue weight of the trailer along with any any cargo behind the rear axle of the towing vehicle.…

Hey Chris, the Weigh Safe weight distribution system part #WS94RR would work great for you. This has a tongue weight range that would work great with your trailer that has a tongue weight of 880 lb.

Hey Joe, thanks for reaching out! What you'll need is the TorkLift SuperTruss Hitch Extension #TLE1542 which can then be used with a weight distribution hitch (WDH). When it comes to a WDH I recommend the Blue Ox TrackPro #BLU47FR which fits with…

I recommend using the Fastway e2 Weight Distribution #FA92-00-1000 for your trailer with the 2 UTV's. This system is also rated for a trailer up to 10,000lbs but has a much wider spread tongue weight capacity of 600-1,000lbs. The Curt #C69JR you…

When it comes to choosing between the Curt TruTrack Weight Distribution System w/ Sway Control #C17499 and the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ37100ET you'll want to take a couple of things into consideration: 1.…