What Happens When A Weight Distribution System Is Over Adjusted

Question

Question:

How would an over adjusted weight distribution system affect the trailer suspension? Could you overload your trailer suspension even though the weight on the axles is less than gvwr without the distribution hitch ?

asked by: Luc

0

Expert Reply:

Over adjusting a weight distribution system can cause a few things to happen. First and foremost, slight over adjustment will affect the ride making it harsh on both the trailer and towing vehicle.

In more severe cases this can lift the front of the trailer up as well as lifting the back of the vehicle. This can cause the trailer to jack-knife much more easily.

On the other hand, under adjusting will not negatively affect anything, but it also won't do the job it is designed to do..

expert reply by: Lazer S

0

Answer 1

Hey Sam! Thanks for the picture of your axle tag. The correct bearing kit is the 15123/ 25580 Bearings, 10-36 Seal #BK3-100. If you want the equivalent from Dexter it is the #DX26ER. Are you getting your trailer ready for an upcoming trip?

view full answer...

Answer 2

To determine which MORryde Premium Rubber Suspension Kit fits your 2020 Forest River Wildwood 27RKSS you will have to measure your wheelbase. To determine your wheelbase, measure the distance between the center of your front wheel to the center of…

view full answer...

Answer 3

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 4

The seal for your Dexter 4,400 lb axle is part #58846 which we also have in a pack of 2 listed as part #RG06-050 these have an inner diameter of 1.719" and an outer diameter of 2.565".

view full answer...

Answer 5

Hey Ronald, The MORryde #MR87ZR, is going to be a good equalizer to go with. There should not be any issues installing that along with the wet bolt kit #MR46ZR on your trailer. One thing I recommend double checking is the length of your current…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 8

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 9

The Dexter Nev-R-Adjust electric trailer brakes can be manually adjusted. There are a couple teeth of the adjustment wheel that are exposed just under the lever that you referenced. I have attached a photo showing the teeth. You will likely need a…

view full answer...

Answer 10

Thanks for letting us help Michael. For the leaf springs, I'd recommend the 4-Leaf Double-Eye Spring #e54SR. This is a 25-1/4-inch double-eye spring that's a great fit for your 3,500-lb axle. If you haven't already planned on it, I'd…

view full answer...

What Happens When A Weight Distribution System Is Over Adjusted

Continue Researching