Looking To Upgrade My Equalizers On My Trailer With A 33 Inch Wheel Base, What Kit Will Work?
Updated 09/08/2025 | Published 06/05/2025 >
Products Featured in This Question
Question:
Looking to upgrade the Equalizers on my 2021 Sporttrek ST251VRK 33 inch wheel base with 3500 lbs axles. Looking at MORryde with wet bolt kit. Any reason this wont fit? What kit would be best?
asked by: Ronald M
Expert Reply:
Hey Ronald,
The MORryde # MR87ZR, is going to be a good equalizer to go with. There should not be any issues installing that along with the wet bolt kit # MR46ZR on your trailer. One thing I recommend double checking is the length of your current equalizer. # MR87ZR is 6-1/2" from center to center of the bolt holes. You want to make sure that the one you are replacing is that length or very close to it so your suspension sits the same. Otherwise there will be no issues using these to upgrade your trailer.
Are you wanting to upgrade your leaf springs as well?
Product Page this Question was Asked From
MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 6-1/2 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: moryde cre3000
- Search Results: 4400 lbs axle trailer bearings races seals caps
- Q&A: Replacement Bearings and Grease Seal for Dexter 4,400 lb Axle
- Shop: Suspension Enhancement
- Q&A: Grease Seal Needed for a Dexter 4,400 lb Axle
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles
- Shop: Dexter Bearing Kit for 4.4K Axles - Bearings LM67048/L68149, Races LM67010/L68111
- Shop: Grease Seal GS-2250DL - Double Lip - I.D. 2.250" / O.D. 3.376" - 5.2K to 8K Axles
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Which Dexter E-Z Flex Equalizers Fit 2002 Bass Cat Jaguar Trailer
- Search Results: equalizer
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
- Q&A: What Happens When A Weight Distribution System Is Over Adjusted
- Search Results: tandem axle equalizer
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
- Video: Installation of the Dexter E-Z Flex Suspension Kit - Enclosed Trailer
- Video: Mount: Dexter E-Z Flex Suspension Kit on a 2021 Grand Design Imagine Travel Trailer
- Q&A: Which Dexter EZ Flex Could Fit 2023 Nitro ZV19 Boat Trailer Trailstar
- Q&A: What Measurements are Needed to Find the Correct Dexter E-Z Flex Equalizers for a Trailer
- Q&A: What is Advantage of Never Fail Tandem Axle Suspension Upgrade Hardware Kit Over Other Options
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern


Nick S.
9/8/2025
Hey Ronald, Did the MORryde equalizer and wet bolt kit work out for your trailer upgrade? I'm asking because your experience could help others looking to enhance their trailer suspension.