Compatible Brake Assembly for Dexter 8-249 10 x 2-1/4 Inch Brake Drum
Published 09/17/2021
Products Featured in This Question
Question:
i have a dual axle car hauler with dexter 8-249 5 lug drums. which brake assembly would i need?
asked by: Brian D
Expert Reply:
The Dexter 8-249 hub/drum is used on a 3500 lb axle, and would be compatible with a 10 x 2-1/4 inch brake assembly.
I'd recommend self-adjusting brake assemblies like part # AKEBRK-35-SA. After an initial adjustment, your brakes will self-adjust so you'll always have optimal braking performance. The brake assemblies include the mud and crud plugs to cover the adjuster holes, but the mounting hardware is sold separately as part # BRKH10B.
I'd also recommend carefully inspecting the armature surface of your brake drums (where the magnets ride against). If this surface is pitted or grooved, you'll want to replace the hub/drums as well using part # AKHD-655-35-EZ-K, which includes the bearings, races, grease seal, dust covers, lug nuts and even the grease.
I've linked some instructional videos that you might find helpful.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer spare tire mount
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Wiring Junction Box - 7 Terminals - Polypropylene
- Search Results: trailer wiring
- Search Results: trailer brake wiring
- Video: A Closer Look at the etrailer A-Frame Trailer Tool Box
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: etrailer Trailer Tool Box - A-Frame - Aluminum - 6 Cu Ft - 34" Long - Matte Black
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: trailer stake pockets
- Video: Detailed Breakdown of the etrailer Electric Trailer Brakes
- Shop: Spare Tire Carrier for Roadmaster Tow Dollies
- Video: etrailer Easy Grease Trailer Idler Hub Assembly Review and Installation
- Video: All You Need to Know About the Optronics LED Clearance or Side Marker Light
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre Greased
- Q&A: Replacement For A Dexter 8-249 Hub And Drum Assembly
- Q&A: How to Tell Left and Right Side of a New Dexter Axle without Taking Off the Hubs or Brakes
- Q&A: Availability of Dexter Axle Brake Assemblies K23-026-00 and K23-027-00
- Video: Ultimate Overview of the Mounting Hardware for 10" Brake Assemblies
- Video: Detailed Breakdown of the Easy Grease Trailer Hub and Drum Assembly
- Video: The Low-Down on the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Q&A: Replacement Brake Assemblies for Dexter 3,500 lb Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: Double-Eye Trailer Suspension System Review
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Accurately Measure Trailer Leaf Springs
on Trailer Hubs and Drums
