All About the etrailer A-Frame Trailer Tool Box Video

Hey Frank, the cross section depth of a frame is the width of the frame's channel. So the etrailer Bolt-On Swivel Mounting Plate for 3,500-lb Trailer Jacks #e52JR can fit on frame channels that are less than 3 inches in width which is due to the…

Hey Frank, the radius for the handle of the etrailer jack part #e22ZV is 8-1/8 inches. That means it sticks out 8-1/8 inches from where it attaches to the jack. From the center of the jack mount to the top of the jack measures 7.5 inches.

Hey Frank, 2" hitch balls like what you see on the Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches #DT49MR should be torqued to 250 ft. lbs. This shank come pre-torqued though, so you shouldn't have to worry about that. If there is…

Hey Frank, on the etrailer box part #e64VV all of the walls are welded. The thickness of the steel is 13 gauge. What will you put in the box?

Hi Mark; I don't have the specs of the 2024 Boss GD20T24 Log Splitter but it looks like you're pretty limited on the tongue space. You may be able to use the etrailer Swivel Jack w/ Bolt-On Mounting Plate #e22ZV but I'm not 100% sure…

If your 2019 Toyota Tundra includes the factory trailer wiring for a trailer it will have a connector under the dash for a Trailer Brake Controller #RED72CR. This Controller #RED72CR does come with the connector for this application. The small…

The best trailer tongue jack option we have for low ground clearance situations is the Ultimate Trailer Jack part #322-RDJ-2K since you can retract the jack body all the way up in the mounting flange. It would be a perfect option and helps cut down…

Hey Rod, The Ark Xtreme Off-Road Jack w/ 2 Wheels #ARK99FR has multiple slots in the outer tube of the jack that the mounting bracket can slot into. In the bottom slot you'd be right around 9-1/2" between the ground and frame with the wheels…

I would be happy to help. The Tekonsha P3 brake controller you referenced would be an excellent choice for you. The P3 is extremely easy to use, and has controls that are intuitive and simple to understand. The diagnostic feature is unique in that…

If your truck has a hitch, tow button and a trailer connector I would expect that it DOES have the tow package. In this case you would use part #3031-P to connect the Prodigy to the truck's under-dash port. Please see the linked video showing the…

I went out to the warehouse and measured the Replacement Tire Mounting Hardware for Bumper Mounted Tire Carrier #2109 and measured 12.76mm (1/2") for the spline diameter, 29.48mm (1-5/32") for the thread length, and the head diameter is…

I had part #2109 pulled from our warehouse and you're correct they are 1/2 - 13 coarse threads.